The bathroom is waterproof, can you knock out the bottom layer of the bathroom and backfill it yours

This is possible, but it is completely unnecessary and the waterproofing will be worse. The most appropriate way is to prepare for waterproofing before, which is more convenient and has a better waterproof effect, but after that, it will cost a lot of manpower and material resources to do waterproofing, and the original design of the bathroom will also be disrupted, so everyone does not recommend this practice.

Many people will pay attention to whether the waterproofing of the bathroom is done well when decorating, but some people will ignore this, or notice but still fail to do a good job of waterproofing So they will choose to knock out the bottom layer of the bathroom and make it waterproof again. If you don't pay attention to the waterproofing of the bathroom at the beginning, then the whole house is damp, and even the home is always in a state of moisture, which will breed bacteria, and the family will be susceptible to diseases. It is even worse if there is a wooden floor in the home, because this will make the floor of the room at home all warped, and all the wooden floors have to be replaced, and the original cost of the wooden floor will be large, and if it is replaced, then the manpower and material resources consumed will change greatly.

So if you don't do a good job of waterproofing, then the whole family is not happy.

Of course, for families who do not do a good job of waterproofing the bathroom, they will generally do some measures to make up for this mistake 。Therefore, many people will choose to knock out the bottom layer of the bathroom and fill it again, and the filling material may be re-selected, and the density of the material will also be re-selected. However, no matter how much you make up for it, it will not be better than before, because doing so will still leave some gaps, and you will still re-enter, resulting in more or less water seepage in the room.

But it can definitely make the house a little better than before, and it won't be as damp as before, so they did the right thing.

When re-knocking and then doing it, we should pay attention to the height of the knock-off and the choice of filling material, if the choice is not good, then it will still make the room in a state of water seepage and leakage, which is a greater disaster for the home. If you choose well, this will make a big difference to the water leakage situation in your home.

I finally spent a lot of money to buy a house, and the decoration of the new house has become a problem again. Waterproofing the bathroom is a top priority Once the waterproof layer is not done, the water leakage will be troublesome.

Many people think that they re-do waterproofing and backfilling, which is more reliable in terms of quality. Is this really necessary? I don't know what everyone thinks, but I personally don't think it's necessary.

If the material used in the waterproof base made by the developer is not good and is damaged, then there is no way, it must be redone, otherwise there will be water leakage, which will directly affect the downstairs neighbor's house is not very good.

But if there is no problem,There is no water leakage, knock it out and do it again, and so on 。Now many owners will have prejudice against the developer, which is time-consuming and troublesome, not to mention, not good, in the process of digging out the waterproof layer, it may also lead to the cracking of the sewer pipe and the floor slab of those cement waterproof repairs, focusing on these places to re-do waterproofing is more troublesome, is the most prone to water leakage.

Owners who know a little bit about the construction industry should knowOn The distributor will do a closed water test when backfilling, and the probability of water leakage is very small. If you really don't worry about the waterproof layer made by the developer, you can do a closed water test yourself to find out. If water leakage is found, in fact, the best construction method is not to remove and redo, but to brush a layer of waterproof paint on the basis of the original waterproof.

If you decide to repaint your home, there are 2 things you need to pay attention to First, if the water and electricity are to be slotted, you can wait for the bathroom water and electricity to be completed before redoing it; Second, the waterproof corner of the bathroom must be made by the master with cement mortar as the base, and the batch is formed into a curved semicircle, so as to avoid the leakage caused by the waterproof brush in the corner of the wall.

Theoretically, it is possible, our home was backfilled when it was renovated, and we should pay attention to the waterproof materials that are done, otherwise it will be very troublesome to rework in the later stage.

Personally, it is not recommended to do this, if there is no water leakage, if you do this, it is easy to re-destroy the original pipes or the gaps between the floor slabs, which will be easy to produce unsafe factors and easy to leak.

Yes, but it is necessary to strictly follow the waterproof specifications, and also consider the height of the toilet and the floor. There is also a part of the wall that should be partially waterproofed.

Of course, you can knock out the bathroom and backfill it yourself, but you still need a professional master to deal with it.

It is best not to make drastic adjustments to the restroom, as there may be safety hazards.

You can do it, but it's cumbersome, and there's no need to do it.

You can knock out the bottom layer of the bathroom and backfill it yourself, but it is not necessary.

No, you have to find a professional master to get this, you can't do it yourself.

This is possible, but it's a bit of a hassle, so it's not recommended to do it.

You can ask a professional waterproofing person to come and see how to deal with it.