Why does the natural gas water heater at home produce hot water in the kitchen but there is no hot w

ÄãºPPR¹ÜµPPR¹Üµ

1. Generally, the water heater will be installed in the kitchen, so the hot water in the kitchen will arrive faster, and you can turn on the hot water in the bathroom for a period of time and then dismantle it. 2. Check whether the hot water pipe in the bathroom is blocked or whether the faucet is dialed to the hot water outlet. 3. Another reason is that the internal pipe is connected incorrectly, resulting in the situation that there is no hot water when the hot water switch is opened.

Hello, this is a common problem that can exist for many reasons, the main ones are the following:1The installation location of the water heater may be different, the water heater in the kitchen may be installed on the wall, and the water heater in the bathroom may be installed on the ground, which will affect the flow of the hot water.

2.There may be problems with the pipes of the water heater, such as blocked pipes, aging pipes, leaking pipes, etc., which will affect the flow of hot water. 3.

The power of the water heater may be different, and the water heater in the kitchen may be more powerful than the water heater in the bathroom, which will affect the flow of hot water. 4.The temperature setting of the water heater may be different, and the water heater in the kitchen may be set at a higher temperature than the water heater in the bathroom, which will affect the flow of hot water.

In conclusion, there can be many different reasons for the water heater in the kitchen and bathroom to cause hot water to come out of the kitchen and no hot water in the bathroom. It is recommended that you can find a professional maintenance personnel to inspect the water heater so that the problem can be found and solved in time.

1. Generally, the water heater will be installed in the kitchen, so the hot water in the kitchen will arrive faster, and you can turn on the hot water in the bathroom for a period of time and try again.

2. Check whether the hot water pipe in the bathroom is blocked or whether the faucet is dialed to the hot water outlet.

3. Another reason is that the internal pipe is connected incorrectly, resulting in no hot water when the hot water switch is turned on, and you can put water on both sides of the hot and cold water for a period of time to try again.

If the kitchen opens the faucet and hot water comes out, it means that the water heater can be ignited normally, and there is no hot water in the bathroom, it should be that the water heater has failed to ignite and run, it may be that the hot water pipeline connected to the bathroom is blocked, or the shower outlet hole is blocked by scale or impurities, and the water flow is too small to cause the water heater to fail to ignite.

I've been putting this problem faucet for a long time and it still hasn't been solved.

If your natural gas water heater can have hot water in the bathroom, if the pipeline has not changed, according to your description, the pipe leading to the bathroom should be blocked, resulting in insufficient pressure difference, and the water heater cannot be started, you can remove the faucet in the bathroom and check it.

You can call the after-sales personnel of the water heater to check it.

If you have a gas water heater installed in your home, you will have hot water in the kitchen but not in the bathroom. The first thing that could be a blockage in the bathroom hot water pipe. If the hot water pipe in the sanitary eggplant room is blocked, the hot water in the water heater will not flow smoothly into the bathroom; Secondly, the water flow between the hygienic silver is too small.

If the water flow speed in the bathroom is too small, it is impossible to trigger the starter of the gas water heater, so that there will be no hot water; Finally, there is a waiting time. If the water heater is close to the kitchen and far from the bathroom. It takes a certain amount of time for the hot water to flow to the bathroom, so be patient and wait for a while for the hot water to appear.

Gas water heaters are very common in life, because natural gas is a clean energy, so the use of gas water heaters is very environmentally friendly, and compared with electric water heaters, gas water heaters are also more affordable and durable. The hot water speed is also very fast and hot water comes out at any time. As a result, gas water heaters have become the first choice for many people when decorating their houses.

If you have a gas water heater installed in your home, you will have hot water in the kitchen but not in the bathroom. The first thing that could be a blockage in the bathroom hot water pipe. If the hot water pipe in the bathroom is blocked, the hot water in the water heater will not flow smoothly into the bathroom; Secondly, the water flow in the bathroom is too small

If the water flow speed in the bathroom is too small, it is impossible to trigger the starter of the gas water heater, so that there will be no hot water; Finally, there is a waiting time. If the water heater is close to the kitchen and far from the bathroom. It takes a certain amount of time for the hot water to flow to the bathroom, so be patient and wait for the hot water to appear.

>1. The hot water pipe in the bathroom is blocked. If the hot water pipe in the bathroom is clogged, then there will be hot water in the kitchen and no hot water in the bathroom. We need to check the hot water pipe in the bathroom to see if there is a blockage, and if it is blocked, it can be cleaned up in time.

>2. Insufficient water flow in the bathroom. The gas water heater also needs a large enough water flow to start, if the water flow in the bathroom is too small, then it is impossible to trigger the starter of the gas water heater, so that the gas water heater does not work, and of course there will be no hot water flowing out. We need to check the size of the water flow.

>3. The distance between the bathroom and the bathroom is too far. If the gas water heater is close to the kitchen but far from the bathroom, the kitchen will quickly produce hot water, and the bathroom will have to wait for a while for the hot water to come out. So be patient enough and wait a little longer for the hot water to come out.

What do you think are the advantages of gas water heaters?

This must be a problem with the piping. Generally, the pipes in the bathroom are not connected properly, or the hot and cold water is reversed, so you can try it in reverse?

Hope, thank you.

Why does the natural gas water heater at home produce hot water in the kitchen but no hot water in the bathroom? I think if there is hot water in the kitchen and there is no hot water in the bathroom, it may be that the hot water pipe in the bathroom is blocked. You can clean the hot water pipes a bit so that there will be hot water.

Hello, this situation can be investigated from the following three aspects: First, the pipe from the water heater to the bathroom is blocked. Nowadays, there are many PPR pipes, and it is easy to cause pipe blockage when scalding.

In addition, the rubber gasket of iron pipe or PPR pipe joint is also easy to be wrung out due to quality problems, resulting in blockage of the pipe. Solution: Check whether the pipeline is smooth.

Second, the water discharge time is short and the pipeline is too long. Before the hot water could flow, the washing was finished. Workaround:

Leave hot water on for a while. Thirdly, the cold water pressure is too high, or there is a problem with the mixing valve. Workaround:

Test the cold water pressure between the kitchen and the bathroom, whether the gap is too large. Or replace the mixing valve. Many times, the mixing valve is bought as bad.

It may be that the bathroom does not have a hot and cold water connection, the inside of the hot and cold water valve is blocked, the hot water valve switch is out of order, and the triangle valve is not opened.

Hello, there are two reasons: one is that the hot water pipe leading to the bathroom is blocked, and the other is that the water pressure is enough.

Why does the natural gas water heater at home produce hot water in the kitchen but no hot water in the bathroom? At this time, you need to check the pipes and the valve for hot water to see if there is a problem. The valve can be replaced.

1.Generally, the water heater will be installed in the kitchen, so the hot water in the kitchen arrives faster. 2.

Check that the hot water pipes in the bathroom are not clogged or that the faucet is dialed to the hot water outlet. 3.Another reason is that the internal pipes are connected incorrectly, resulting in the situation that there is no hot water when the hot water switch is turned on, and you can put water on both sides of the hot and cold water for a period of time to try again.

Summary. 1. The natural gas water heater at home, the kitchen can produce hot water but there is no hot water in the bathroom because the pipe in the bathroom is blocked and the hot water pipe in the bathroom cannot pass.

2. Another is that the water flow rate is set too large. When choosing a water heater with this natural gas, you need to pay attention to modulating the predicted water output, but if the temperature difference between the hot water and the incoming water is relatively large, the hot water flowing out per minute will not meet the relevant standards, resulting in no hot water supply.

3. There is a device called exchanger in this water heater, but there is too much scale and carbon in it, which is easy to cause blockage, which will greatly reduce the thermal efficiency, and it cannot be heated, and there is no hot water supply.

4. There are also reasons for the ignition device to malfunction or there is no battery, which will cause no hot water to come out.

Why does the natural gas water heater at home produce hot water in the kitchen but there is no hot water in the bathroom?

1. The natural gas water heater at home, the kitchen can produce hot water and the bathroom has no hot water because the pipe in the bathroom is blocked and the hot water pipe in the bathroom cannot pass the pressure 2. When choosing a water heater with this natural gas, you need to pay attention to modulating the predicted water output, but if the temperature difference between the hot water and the incoming water is relatively large, the hot water flowing out per minute will not meet the relevant standards, resulting in no hot water supply. 3. There is a device called exchanger in this kind of water heater, but there is too much scale and charcoal in it, which is easy to cause blockage, which will greatly reduce the thermal efficiency, and it will not be able to heat, and there will be no hot water supply before the town.

4. There are also because the ignition device is faulty or there is no battery, which will lead to no hot water coming out. Yushengqing.

If my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood.

If there is no hot water in the open bathroom, and the natural gas water heater is not ignited, it means that the water pressure switch has not been triggered, and the water volume in the bathroom should be smaller than normal.