How to install parquet? Is it better to use glue or plug it in?

I just finished decorating and looked at a lot, and finally decided on a round floor. The quality is really nothing to say, the service attitude is top, friends with wooden floors go to see it, and the laminate floor blisters are fine.

Solid wood parquet generally has a card slot, and the business will tell you that it is glue-free, but it is best to ask the installation master to apply glue, in fact, the installation of composite flooring should also use glue, so that the floor is not easy to produce gaps and has a certain waterproof effect, and there is generally a special floor glue. However, there is also an advantage of not using glue, that is, if you move, the floor can be removed and reused and reinstalled.

I took a look at other people's answers, what they said makes sense, glue is definitely not usable, first of all, the use of glue will have an impact on your health, why there is formaldehyde on the floor, mainly because of glue and paint, the formaldehyde release does not exceed the standard, you will definitely exceed the glue, and because the floor has its own texture, that is, wood fiber, it has a moisture content, so the floor will shrink and shrink wet, that is, they say to leave expansion joints, if you don't stay, the floor will bulge. There will be a sound when walking, don't hit the keel, because after a long time after hitting the keel, there is a creaking sound when walking back, which is very disturbing, and it is also very troublesome to disassemble and assemble, is the floor you buy large (more than 1 meter) or ordinary (about 900mm)? If it is large, it is better to pack it with 3 or 6.

The small one is only half a pack. Also, when you buy flooring, you must buy a good after-sales business, after-sales is very, very important, especially for wooden flooring, shrinkage joints and warping often have to find workers to deal with you, after all, the humidity span of the four seasons is relatively large.

Glue cannot be used.

Parquet also needs to "breathe", it also has a certain stretch. After using glue, the floor will swell or produce cracks, which will damage the floor.

Go with the flow of laying.

Only laminate flooring uses glue.

The installation of solid wood plywood is the same as that of the wood floor, which is erected with a keel and installed with a nail gun or a nail installation is the most reasonable.

The tongue and tongue of the parquet is directly spliced with the male groove and the female groove. It is best if it is stuck with a small spring in contact with the floor. The expansion and contraction of the spring can be used to condition the changes in the floor due to changes in ambient humidity.

Direct splicing is fine, just leave a reserved seam.