-
Anonymous users2024-01-23The spacing of the self-tapping screws should not exceed 20 cm, and there should be no loosening;
Gaps of 3 5 mm should be left in the joints of drywall;
Use good quality caulking putty to caulk and ensure that the caulking putty enters the deep gap (at the transverse joints of the gypsum board, cut out the bevel with a utility knife to facilitate the entry of caulking putty);
The batch insertion of the caulking putty should be smooth, and the bandage should be applied after confirming that it is dry (the putty has contraction, and the uneven places should be flattened);
The white latex used for bandages and bandages should be of high quality.
It's not easy to do every step (easy to say), but every step is related to whether it cracks or not.
-
Anonymous users2024-01-22After the putty is laid, be sure to wait until it is dry before applying the wall paint, and it will basically not crack, unless the vibration of the house itself causes cracking.
-
Anonymous users2024-01-21The splicing surface is made of V-shaped seams, epoxy resin is filled with sawdust, and the mesh paper is added to kraft paper. Then batch putty, latex paint.
It's the basic practice of my decoration company. If there are no external factors, it will basically not crack.
-
Anonymous users2024-01-20Now there is a kind of seam specialist who specializes in seams, which is very simple, does not need to put a bandage, and is guaranteed to never crack.
-
Anonymous users2024-01-19The best way is to use nylon cloth 5 6cm wide, the weaving texture of nylon cloth to form the warp and weft in two directions, cut along the warp and weft sides when cutting, not obliquely cut. The base treatment is clean and level; This keeps the surface of the latex paint free of cracks for a longer period of time.
Integrated plasterboard or traditional plasterboard? Traditionally, there are many problems, such as deformation, cracks, ash, etc., and the new integrated decorative gypsum board will not, easy to install, environmentally friendly, good-looking and diverse, Class A fireproof, etc.
After a wall, the floor tile is completed, and other major construction is completed.
If it is an ordinary gypsum board ceiling, there is no base layer, it is about 120 yuan 1m2, the material price is about 60 yuan m2, and the labor cost is about 60 yuan m2.
There are disadvantages of PVC suspended ceilings:
PVC gusset is also the plastic board we often see, PVC gusset is light in weight, waterproof, moisture-proof, heat insulation, not easy to burn, no vacuuming, easy to clean, more suitable for kitchen, bathroom ceiling decoration. 1. The advantages of PVC gusset ceiling 1, the material is light in weight, easy to install, waterproof and moisture-proof, moth-proof, and pollution-resistant, easy to clean, good performance of sound insulation and heat insulation, especially the addition of flame retardant materials in the new process, so that it can be extinguished from the fire and safer to use; 2. The cost of PVC gusset material is low, so the cost of PVC gusset ceiling is very low, and the installation is also very simple. Second, the shortcomings of PVC gusset ceiling 1, the general disadvantage of plastic material is that the physical properties are not stable enough, so the key problem is that even if PVC does not meet water, it will be deformed after a long time. >>>More
How to clean up after renovating the house.
1. Tiles are suitable for wiping while paving, while paving tiles to wipe cement stains on the tiles pasted first, when a wall is paved, most of the cement marks on the tiles are also wiped off, and it is recommended that the landlord should supervise the workers to clean the surface of the tiles after the tiles are paved. Some tiles will have a layer of film on the surface, which is a layer of wax that the manufacturer applies to protect the surface of the tile before leaving the factory, and it can be gently wiped off after decoration, so you don't have to worry about the tile being affected. >>>More