-
Anonymous users2024-01-23Integrated Ceiling Replacement Bulb Steps:
First of all, remove a piece of the gusset next to the lamp (with a suction cup or a sticky hook), then remove the lampshade, and then press the tube of the same model. Finally, press the lampshade and the removed gusset.
Precautions: 1. Take lightly, do not use too much force, otherwise the lampshade and gusset are easy to deform;
2. Remember the original installation direction, it is easy to produce color difference when pressed backwards. None of the bulbs with integrated ceilings are produced by ceiling manufacturers. It's all OEM.
That is, it is commissioned to produce by a bulb manufacturer. When you replace it, try to choose a well-known brand bulb, which is more thermally efficient and safer.
-
Anonymous users2024-01-22First of all, remove a piece of the gusset next to the lamp (with a suction cup or a sticky hook), then remove the lampshade, and then press the tube of the same model.
Finally, press the lampshade and the removed gusset.
Precautions: 1. Take lightly, do not use too much force, otherwise the lampshade and gusset are easy to deform; 2. Remember the original installation direction, it is easy to produce color difference when pressed backwards.
None of the bulbs with integrated ceilings are produced by ceiling manufacturers. It's all OEM. That is, it is commissioned to produce by a bulb manufacturer. When you replace it, try to choose a well-known brand bulb, which is more thermally efficient and safer.
Use a professional suction cup to suck off the panel of the lighting module, and change the lamp tube! But you have to find a professional to do it!
Remove the plate adjacent to the lamp, lift the lamp, or move it to the other side of the board, and replace the bulb or board.
Generally, it is who gives the installation and who changes it.
The integrated ceiling has a series of lamps, his lamp is composed of two parts of the mask and the top seat, there is a special suction cup, if not, you can also use the kind of thing that hangs clothes to suck on the wall, suck the mask down, and then change the lamp, the lamp tube is buckled by the buckle, and it is easy to take it down!
-
Anonymous users2024-01-212. Use props to cut out a corner of the aluminum buckle plate, and then slowly remove it;
3. Remove the lampshade of the ceiling lamp and replace the lamp of the same model;
4. Install the lampshade and aluminum buckle plate in order, and fix them firmly.
Pry open the lamp frame with a flathead screwdriver or utility knife blade to replace the bulb. I hope my answer can help you.
You find a stool to stand high and you can see that there are locks and things like that, if you don't have it, just buckle it down gently, it's very neat, it's not so complicated to look at, no experience is required Turn on the light and put it down, and after you turn it on, it will be neat, it's simple.
Generally, there is a hook around the lampshade of the square ceiling lamp to talk about the lampshade on the low plate of the lamp, you touch it counterclockwise with your hand on the roof, you should be able to touch the judgment skin, open the four hooks, you can see the lamp and the lamp card = mouth, dig the difference to remove the bulb and replace it.
Ceiling lamp is a kind of lamp, which is generally installed in bedrooms and living rooms, such as adsorbed on the roof, so it is called ceiling lamp. Ordinary round ceiling lamps are generally dragged to the left and right of the lampshade to screw, if it is square, it is buckled, find the gap between the lampshade and buckle hard. There is also a clamp on the top of the lampshade, and the card is sat on at the end, and the clamp is pulled over by hand and the lampshade is directly down. >>>More
There is after-sales service. It's okay to do it yourself, cut off the power first, use a suction cup (the kind of hook on the tile, made of rubber) to suck the electrical panel, and take the electrical panel off (the suction position should be cautious and the action should be light). Then pull the lamp buckle away, unplug the lamp, replace the lamp, buckle the button, and cover the panel. >>>More