What to do if the toilet sewer pipe is broken

Updated on Toilets 2024-03-30
10 answers
  1. Anonymous users2024-01-23

    It is estimated that there is a problem with the pipeline, so it is recommended to find a professional pipeline repairer to deal with it. I don't know where to look, so I go downstairs to the place where a small advertisement is posted to find a contact information to dredge and repair, basically 180 yuan can be done.

    Usually pay attention not to throw insoluble things into the toilet, do not use insoluble toilet paper, use Rino toilet paper, flush for 2 seconds to dissolve, never block the sewer, and do not use paper baskets in the toilet.

  2. Anonymous users2024-01-22

    If you are in charge, you have to find a professional repair.

  3. Anonymous users2024-01-21

    This time, you're going to need a plumber.

  4. Anonymous users2024-01-20

    What do you mean by bad, bursting, scrapping, or clogging?

  5. Anonymous users2024-01-19

    My family also encountered the same problem a few days ago, at first I couldn't find the cause of the leakage, and then found that the official has a crack, my home is a PVC plastic drainage pipe, found a plumber, he put the crack that broke off, replaced with a new one (you don't have to worry about how to connect, there is a transfer of the interface to connect), after the connection is OK, especially the plastic drainage pipe, especially easy to repair The repair is also very cheap If you don't do it yourself, find a plumber to repair, don't worry

  6. Anonymous users2024-01-18

    1. Conservative treatment: clean the joint surface of the leakage part, and use the plugging spirit to plug the leakage;

    2. Thorough treatment: replace the cast iron sewer pipes, and replace all the sewer pipes made of PVC or PE material.

  7. Anonymous users2024-01-17

    The problem is that the upstairs has been explained almost, I add, this is the drain used by your upstairs neighbor, you should contact your neighbor and let him bear the cost, if it is a leak from the main, the user above the supervisor should share the cost.

  8. Anonymous users2024-01-16

    It should be a PVC drain pipe, which one is leaking, take it away, and connect it when you buy it, but for long-term consideration, it is still leaky and replace the whole one, and the material 100 pieces should not be on.

  9. Anonymous users2024-01-15

    If the crack in the PVC sewer pipe is not large, it can be glued with glue, which requires a certain amount of technology.

  10. Anonymous users2024-01-14

    bumafan is not troublesome.

Related questions
5 answers2024-03-30

Have you ever seen that kind of sticker that treats rain leaks in houses? You can mend the pot and pot, it seems to be tin foil, no matter what material it is, it can be pasted! You can try.

2 answers2024-03-30

It depends on the situation, and if it is serious, it will have to be dug up and repaired.

1 answers2024-03-30

You can use plastic steel clay, A and B components are mixed and smeared, and it is extremely hard after curing, and the sewer part of my sink also has trachoma, and so on after a few days, the thing has been bought, and the small problem is easy to solve.

3 answers2024-03-30

Hello, check whether there is a trap installed in the drain of the toilet fixture, and another is whether there is water in the trap. If there is no water, water can be added, under normal circumstances, the water in the trap can be stored for a long time, if the water is added in a short period of time and the smell is generated, it means that the water in the trap is destroyed by siphon. It is recommended to install a suction valve to protect the water in the trap, which can completely solve the problem of odor in the sewer pipe. >>>More

4 answers2024-03-30

Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or a leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaking place, and then wrap a layer of ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.