-
Anonymous users2024-01-23The default password is random, and the steps to set it are as follows:
Step 1: Press the power supply button at the bottom of the outer panel, press the '*' button three times, and the buzzer will make a long sound;
Step 2: Enter the old password and press the '' button to confirm, the buzzer will make a long sound, and the LED light will flash;
Step 3: Enter the 6 12-digit new password and press the ' key to confirm, the buzzer will make a long sound;
Step 4: Enter the same new password again and press the '' button to confirm.
The above is the steps of how to change the password of the password lock, in the setting process, if there is an error in the input, the system exits the setting procedure, if the input is correct, the buzzer sends a long sound (or music sound) to indicate success, and the LED light goes out.
Iron God fingerprint password lock anti-theft function The quality is OK, and the general fingerprint password lock manufacturers will set up the bidding password, and then there are instructions to bring,
Fingerprint password locks, under normal circumstances, use fingerprints to open the door. >>>More
The default password is random, and the steps to set it are as follows: >>>More
Push the password as far as you can in the opposite direction of the switch. >>>More
Anti-theft door smart password lock installation skills: 1, the inner and outer panels are not equipped with handles, according to the left and right direction of the door, please first install and fix the handles on the inner and outer panels, please be careful not to install them in reverse. 2. Insert the lock cylinder into the lock body hole, slightly tighten the lock cylinder bolt, and turn the lock cylinder lever, one is to verify that the lock cylinder is installed in place; the second is to verify whether the unlocking status is smooth; After confirming the qualification, fix the lock cylinder bolt, and the lock cylinder lever is exposed to 15+-3 mm. >>>More