After the water was stopped, the water in the toilet storage tank was completely gone

Summary. 1. Check the water filler filter in the water tank to see if it is blocked by debris, if so, take off the filter screen to clean up the debris and use it.

2. See if the float of the inlet valve can float normally, if it is stuck, it can be straightened.

3. Look at whether the button on the water tank is still elastic, which is also the reason why there is no water, as long as you change a button.

After the water was stopped, the water in the toilet storage tank was completely gone

1. Check the water refiller filter in the water tank to see if it is blocked by debris. 2. See if the float of the inlet valve can float normally, if it is stuck, it can be straightened. 3. See if the button on the ruler dust tank is still elastic, which is also the reason why the water is not available, as long as you change a button.

I don't understand, you take a picture and see the explanation.

We don't know what to do.

Leaking drainage. It's not a water leak.

Drain leaks can also cause the tank to run out of water.

If you don't flush and the water in the tank is gone, it means that the leakage seal is not tight and leaking, so just replace the seal.

The water didn't go in, so we had to wait for the water to come.

Either it flushed it out or it leaked!

It's just a slight leak, but I can't see it with my right eye.

Because the water stopped, there was no water in it after it was charged.

Didn't you turn off the angle valve? The water flowed back.