-
Anonymous users2024-01-23The water pipe in the bathroom has been used for a long time to produce scale, and the right medicine can be prescribed The main thing for you now is to find out where the problem is Don't be too blind The loss is money.
You can close the main water valve, open the faucet closest to the water inlet pipe, and then open it to the farthest faucet and blow it with your mouth to see if you can blow the dirty thing at a different angle and then flow out of the boiling water valve.
Unscrew the water pipe of the sprinkler head and the water valve, I tried it very tight a few days ago, I thought I had to have a tool, and today I tried it with my bare hands and unscrewed it. I couldn't find a thin wire, so I used something to thread the needle to make a drum at the water outlet, and then opened the main water valve, and found that the water output of hot and cold water returned to normal. During this time, no foreign matter such as limescale was discharged, so the cause is unknown.
Whatever, it works fine anyway.
-
Anonymous users2024-01-22With pure cement slurry, there will be no water leakage after plugging.
Generally, the waterproof plugging materials in the bathroom include plugging king, waterproof treasure, and water glass; It can also be filled with polyurethane grouting materials, etc. >>>More
There are about 3 kinds:
The first way: use instant plugging agent to seal the gaps of floor tiles and treat them simply. The cost of doing this is low, but the waterproof life is short, about 1 year; >>>More
Oriental rainbow waterproof. Regarding the waterproofing of the bathroom, it is recommended to redo it, and it is necessary to remove the tiles and re-pave it after the waterproofing. The cost is larger. Therefore, waterproofing is a very heavy step in the bathroom, and it is time-consuming and laborious not to do a good job of rework. If it is blocked, it will also treat the symptoms but not the root cause.
There are no bad effects.
The plugging agent used in the bathroom itself does not have strong acidity and alkalinity, that is, its own corrosiveness is not strong. There won't be much bad impact on the floor heating water pipeline. >>>More
The first step is to figure out the construction age of the building, if it is a new house, it is often a problem with cement materials, waterproof materials, etc., then it needs to be renovated, if it is an old house, it is often caused by cracks. >>>More