How to plug the leakage in the upstairs bathroom?

The first step is to figure out the construction age of the building, if it is a new house, it is often a problem with cement materials, waterproof materials, etc., then it needs to be renovated, if it is an old house, it is often caused by cracks.

The second step is to clean up the leakage place, find the leakage factor at the most basic level, and choose the waterproof material for backup.

The third step is to carry out waterproof construction treatment for the leakage part, which can repair the cracks, and pay attention to adding an additional layer during construction to ensure safer.

The fourth step, after the construction of the waterproof layer is completed, the polymer waterproof material should be painted on the surface to truly achieve waterproof and leak-proof.

The fifth step is to do a test during the construction 24 hours to verify whether the leakage is successfully filled, and if successful, you can do surface repair work, such as painting the wall, pasting porcelain tiles, etc.

In addition, the price of maintenance is also very different, and it should be determined according to the cause of the leak and the difficulty of construction, so when encountering water leakage in the upstairs bathroom, you must not be impatient and impulsive.

Go to the hardware store to buy a generation of water that does not leak, and add water to the safety manual to make a thin paste, and it may be useful to pour it into the cracks of the wall. The exterior can be leveled without leakage in water.

The reason for the leakage is not whether there are any seams, but that the waterproofing is not done well.

Now in this situation, if you want to completely solve the problem, the only way to do it upstairs is to knock out all the bathroom bricks and re-do the waterproofing and then pave, which is obviously impossible. So you better discuss with the upper floors and let their family take less baths.

If you want to never seep water, you need to make a layer of leakage plugging upstairs, and the floor tiles of the bathroom are re-pasted. Other methods can also seep water.

You can go to the store that sells waterproof materials to buy the plugging king, and the effect is not bad.

There are plumbers that use "water leakage" to buy plumbing, like white cement but dry faster than cement.

No way! You've got to leak that! Or just smash the ground upstairs and redo the waterproofing!

Just seal the seam with cement.

Live some cement, slip the seam a few times, and it's good.