-
Anonymous users2024-01-23The nominal value is not equal to the actual allowable value. Especially inferior products.
-
Anonymous users2024-01-22The key to this problem is the problem of socket row. I analyzed, the socket you bought is not a regular brand, one is the wire diameter is thinner, and the other is that the power switch on the socket is not strong enough and is easy to burn. Electrical products must be purchased from regular brands. Good luck.
-
Anonymous users2024-01-21Generally, it is a problem with the socket row, and the quality of the contact piece of the socket row is too poor.
In addition, the electrical appliances should be 10A, and the socket or socket should have at least 12A, and there should be a margin.
-
Anonymous users2024-01-20Ordinary sockets are all 10A! If it is bigger, it is 16A, and the 16A socket is dedicated. , the jack distance is not the same, and you basically can't use it!
The burnout of the socket is not because the capacity is not enough, but that the socket is not good enough! The quality of the socket is too poor, and the strength of the copper inside is not enough, so it is easy to get weak and heated, so change it to a good one!
-
Anonymous users2024-01-19The sockets in the kitchen are affected by moisture and fumes, and the contact will not be good enough, and the contacts that are often overheated will burn out, so it is necessary to replace them frequently.
-
Anonymous users2024-01-18Or use a genuine socket, safe and reliable.
Have fun!
It has to do with the location and event planning, and if there are fewer activities, business will of course be deserted.
At the same time, there is too much electricity, and a self-protection consciousness of the circuit is to stop you and turn off the other kitchen electricity, or your oven uses too much, and the kitchen does not use such a high voltage, I guess.
The toilet flange ring is connected between the toilet bowl and the water outlet, which is installed at the bottom of the toilet outlet, which is a kind of sealing ring, which can prevent the sewage in the toilet from rushing to the outside of the sewage pipe, and can also prevent the odor of the sewage pipe from coming back. >>>More
There is a problem with your circuit diagram, as you described, if the toilet and bedroom do not turn on the lights or use electricity, the kitchen will not be able to use electricity, right, buy an electric pen, try whether the kitchen has electricity, turn off all the air switches, and then try whether the power is off, if you are sure that all the switches can control the kitchen power on or off, buy a new socket, turn off all the empty open and replace the wall socket in the kitchen, the two dots of the kitchen socket are screws, which can be buckled, and if it is not buckled, it will be destroyed, and the sewing needle will be nailed in with a hammer and warped out. >>>More
The main reason is that you won't be hungry, and you may be able to make it.