What should I do if the toilet is not used often, and it will grow moss

How to deal with leakage of toilet inlet valve.

1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets has been worn for a long time, and occasionally there will be a phenomenon that it cannot be reset, if it cannot be reset, then it can be switched on and off several times, so that it can be reset. There is also to check whether the rubber gasket of the drain port under the ball valve is aging, the sealing is not tight, etc., and if the problem is found, it should be replaced, so as not to affect the use. >>>More

What should I do if my household toilet is clogged? The toilet is clogged, generally the water trap is blocked, the best and easiest way is... >>>More

What to do if the toilet is clogged; The toilet is clogged, usually at the drain bend, and the best and easiest way is... Use a thicker hose and put one end on the faucet, and insert one end into the toilet trap, trying to insert it through the trap. Then turn on the faucet, twitch the hose back with your hands, and try to poke through the water trap (but don't be afraid of dirt and smell) until it is poked through (three or five times faster, two or three minutes slower). >>>More

What to do if the toilet is clogged; Toilet blockage, generally there is a blockage at the toilet trap, the best and easiest way is:: >>>More

The trick to quickly unclog the toilet bowl is very practical.