For example, if the bathroom seeps water into the downstairs bathroom, will it make wires on the roo

Updated on Bathroom 2024-03-21
2 answers
  1. Anonymous users2024-01-23

    It can only be said that there is this possibility - the leakage location near the lamp line may enter the line pipe, resulting in line leakage and tripping.

  2. Anonymous users2024-01-22

    No, the wires are all in the wall, and there are pipes, even if the pipes leak, the wires still have skin, even if there is no skin, at most there is electricity on the wall, and if the leakage is strong, it will trip, even if you touch it, it is just a numb hand! Of course, water leaks must be repaired as soon as possible!

Related questions
2 answers2024-03-21

It is not recommended to construct from downstairs, and it is not recommended to use grouting waterproofing for backwater construction from downstairs construction, and it is not recommended to use it to treat the symptoms but not the root cause; >>>More

7 answers2024-03-21

If you don't want to dig tiles and redo waterproofing, you have to find an easy way. >>>More

3 answers2024-03-21

First of all, determine whether the wall seam seepage goes down, and to understand whether the bathroom is sunken, whether the waterproofing of the bottom plate below has been done, you can first use epoxy seam glue caulking to see the effect, if it is a small area of water seepage of a single-layer prefabricated board, you can also use UD001 high-strength special impermeable material on the ceiling roof downstairs to do the backwater surface impermeability, and the specific implementation requires a professional waterproof plugging master.

1 answers2024-03-21

It's okay, because the cracks are unimpeded when the tiles are opened, so the watermark is big, and I will look at it every two or three days after doing waterproofing, and there should be no more water seepage, if the water seeps again, it is not good to be waterproof.

7 answers2024-03-21

Look at whether the outer layer is leaking or the inner layer, the outer layer can be strengthened with some waterproofing to fill the leaking gaps, and there are many transparent brushes that have little impact on the floor. The inner layer was only dug up and redone.