Can I install hot and cold water pipes in the bathroom together?

It will not have much effect if they are placed together, but it is better to separate them by 2-3 cm to avoid heat transfer to the wall of the cold water pipe, and the adjustment of the water temperature will fluctuate a little.

The outlets must be together, and the pipes can be arranged separately or together, but don't stick together.

Preparation for the installation of hot and cold water pipes.

1. Generally, the bathroom has hot and cold water pipes, and it is best for us to draw the corresponding drawings before construction.

2. The spacing between the hot and cold pipes can not be too close, and at the same time, the bathroom water pipes are all from the roof, which can reduce the probability of man-made damage.

3. The interface and outlet of the hot and cold pipes must be parallel, generally the left is hot, and the right is the cold water pipe. The wiring of the pipe should be designed in such a way as to avoid bending and as far away from the circuit as possible.

4. Finally, the position and slope of the pipe clamp should also meet the requirements, and each valve should be installed smoothly to facilitate future use and maintenance.

The spacing of the hot and cold water pipes embedded in the bathroom wall is determined by the nature of the water outlet door you use (hot and cold water faucet, electric water heater double water section door), and the spacing between their two water outlets.

Do not settle together, 15cm apart.

Generally, there is a hot water pipe on the left and a cold water pipe on the right.

Can I mix hot and cold water pipes when renovating? It's not safe like this!

You can't press it together, one in, one out, how to press it together, but you can choose the brand, there are poly tubes, satellite tubes, and unknown tubes, whatever tube is good, just use it.

Hot and cold water pipes can be installed together in the bathroom.