-
When the water comes out of your rice cooker, the water will enter the circuit board and there will be a short circuit, and the leakage switch will turn off the power after the short circuit, because the socket in your kitchen is a separate leakage switch. There are 2 solutions: 1. You replace the rice cooker with a new one, 2. Don't put so much water and don't cover the pot when you cook porridge, so that the water won't come out.
-
Find the property to check which line is short-circuited, and take a look at the main gate fuse.
-
The empty is off, push it up and try it.
-
First of all, open the electric switch, open the socket when there is no electricity, wipe the porridge skin with a clean damp cloth, wait for it to dry and then install the socket, and give it to the power supply.
-
See if the circuit breaker tripped?
-
You're the kind of one. Rice cooker.
When the water comes out, the water comes in.
Circuit boards. There will be a short circuit, after a short circuit.
Leakage switch. Yes.
Turn off the power. Because of you. KitchenTarget.
Receptacle. It is a separate leakage switch. There are 2 kinds of solutions: 1. You Gao Lap replaces a new rice cooker, 2 you.
Cook empty porridge. Don't put so much water and don't cover it.
Pot. The water won't come out.
Find someone to repair it. It should be plugged in when it is empty.,Caused.。。 I have not passed the warranty period
The power of the rice cooker is too high, it is overloaded, or it is a short circuit, and the safe use of electricity is to find a professional to repair it.
You can't connect directly to the mains!
It is necessary to connect the current limiting element in series, usually in series with a resistor. >>>More
The low water level is a float problem, and the water level can be adjusted by adjusting the height of the float. The structure of different water tank accessories is different, and you can explore and adjust the structure of your own water tank accessories or ask a professional master to help.
There is a toilet splash-proof product, its idea is to install a hollow rubber airbag at the bottom of the toilet cushion, place a special balloon on the inner wall of the toilet, this balloon will not burst with a needle, and then use the trachea to connect the balloon with the airbag, when you defecate, you must put the toilet cushion down, and then sit on it, when you sit down, the airbag is under pressure, and the air inside flows to the balloon, so that the balloon is inflated, and the stool falls directly on the balloon, not directly in the water, In this way, there will be no splashes on the buttocks, when the rubber airbag is not under pressure, the air in the balloon will automatically flow back to the airbag, and it will not clog the toilet when flushing.