The toilet started to drain slowly, and after I poked it, the water couldn t go down, what should I

Updated on Toilet 2024-03-03
4 answers
  1. Anonymous users2024-01-23

    It is estimated that the toilet is clogged. Please take a look at the water and electricity.

  2. Anonymous users2024-01-22

    Wait for ten minutes, use a full bucket of water, and fill it vigorously.

  3. Anonymous users2024-01-21

    In the case of your family, it is estimated that the toilet is clogged, and if you can't fix it yourself, you have to find a professional dredge master to help. Let me introduce you to a few commonly used toilet unclogging methods::

    Method 1: Many times the toilet flushes more water, and it will be cleared by itself, especially if it is a soluble or breakable item such as soil and paper. If it's greasy, then rinse a basin of boiling water to melt it.

    Method 2: Go to the hardware store and buy a soft hook for dredging pipes, which can hook up the blockage.

    Method 3: Try to plug the hose into the pit and pass it downwards to stir up the blockage. This method is suitable for blockages that are prone to agitation.

    Method 4: Put the toilet full of water, block the mouth of the toilet with a mop, keep lifting it and then poke it down, the amplitude is not too large, but the action should be strong and fast.

    Method 5: Go to the hardware store to buy a suction cup with a handle, and it will pass after a few gasps.

    Method 6: You can make your own, find a stick of about the same length, wrap the cloth around one end, wrap the cloth into a ball or column, the diameter is slightly larger than the diameter of the toilet drain, and then put on a plastic bag, and then poke it down.

    Method 7: If the toilet is blocked by sediment or a large number of hard objects, stir with a steel wire that can bend into the toilet bowl to dredge the toilet.

    Method 8: Use a relatively long plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to dredge.

    It is worth noting that different blockages are suitable for different methods, and which method is suitable should be selected according to the situation of the blockage.

  4. Anonymous users2024-01-20

    Go to the local building materials market, spend 10 yuan to buy a pipe dredger, go home and dredge it yourself, and get it done in 10 minutes:

    And it can be used in the future.

Related questions
1 answers2024-03-03

The sound of the water. It's full and it's silent. It's normal.

3 answers2024-03-03

If the toilet was originally unblocked, now this is the case, you don't want to dismantle the toilet first, you first go to the people below, negotiate with them, open the toilet water storage elbow above the ceiling of his bathroom, this place may have straw paper or something to block, if there is nothing in the water storage bend, please dredge a professional to dredge this level of pipe, I think it will definitely solve the problem, if this can not be solved, you ask a plumber master to remove the toilet, do not dismantle it yourself, the foot is easy to break. I hope you find my answer helpful.

23 answers2024-03-03

Flush toilet drains slowly and has no suction: 1. The amount of water in the water tank is small, and the length of the pressure rod changes, which causes the water stop pad to be reset quickly to stop the water, and the length of the pressure bar can be adjusted to a suitable one. >>>More

1 answers2024-03-03

1. There are two common reasons for the weakness of flushing in the toilet: >>>More

9 answers2024-03-03

It's the same everywhere, boy, do a good job, don't worry about the past. Happiness is not because you have more, but because you care less!