What brand of bathroom waterproofing has a good effect and a moderate price?

Hello, I don't think this is a question of the brand, but a question of considering what kind of waterproofing material to use - the brand is not important. Good brand, it's also "good" at a price. For waterproofing at home, it is recommended to use cement-based waterproofing materials.

Others, such as asphalt, coils, and the like, as well as gelatinous ones that cannot be bonded with cement, cannot be used even by large brands. Because of the floor tiles and wall tiles attached to these waterproof materials, the problems of shelling and hollowing will basically occur; The cement-based waterproof material can be bonded with the cement base, and the waterproof function is also very good, and the tiles on its surface will not fall off due to hollowing. Nowadays, most of the home decoration waterproofing is used in this way.

The price ranges from about 30 yuan square meters, which is not high.

Personally, I think that compared to the brand, what kind of waterproof material to choose is the most important! Bathroom waterproofing suggests that you can directly choose mortar waterproofing agent, which is not only firm and sticky to the base surface, but also has high puncture resistance and high puncture strength, which can have the same life as the building, and the construction is simple and cost-effective.

High is now the preferred material for home improvement waterproofing. It is necessary to pay attention to the construction according to the product construction instructions, so as to ensure a good waterproof effect.

You don't know if you have it, we use the Black Panther for decoration in Guangdong, the quality is OK, I can do the decoration for 7 years, I used to use 911 Naughty La, and now we use Black Panther, which is a lot of waterproof fakes.

Oriental rainbow.

The net weight is 5kg, 10kg, 20kg

Yuhong Haoshi 100 high-elasticity thick acrylic waterproof coating is a thick one-component waterproof polymer waterproof coating material made of modified acrylate polycopolymer emulsion as the base material, adding a variety of additives and fillers through scientific processing.

It is milky white liquid at room temperature, and it should be in a uniform state without agglomeration after stirring.

The physical and mechanical properties of Yuhong Haoshi Tu 100 coating are higher than JC T864-2008 standard.

It can be applied on a wet base layer, with high bond strength and a firm bond with the base layer.

The coating film has good elasticity and elongation, and has strong adaptability to shrinkage and deformation cracking of the base layer.

Cold construction, easy construction and easy maintenance.

Precautions] The temperature of this product should be higher than 5 during construction, and it is not suitable for construction in rainy weather or when there is open water at the base level.

This product is not to be consumed.

The waterproof coating film should be completely dried before the surface decoration can be carried out.

Three times the coating film is completely dry for about 2 to 3 days, and the humid environment should be appropriately extended.

The first time the painting can be properly diluted with water, and the amount of water added should not exceed 10% of the amount of paint.

Scope of application] It is suitable for waterproof and moisture-proof construction of indoor toilets and bathrooms, kitchens, balconies and floors, and moisture-proof wooden floors, and is more suitable for new house decoration.

Home improvement waterproofing construction steps].

Base treatment, detailed node treatment, waterproof primer, large-area brushing, closed water test, and protective layer.

Michi K11. The brand I'm using. It is well-known in Fujian, don't choose too expensive, it's not necessary.

JCDecaux. Cementitious waterproofing is ranked No. 1 in the world

I recommend "Leibonshi". The flexible type is very useful in the north.