Ask a carpentry professional What does it mean to finger a solid wood cladding door? Please be detai

Updated on Solid wood 2024-03-02
3 answers
  1. Anonymous users2024-01-23

    Hello. What it means is that the base layer inside is made of finger jointing boards. If it is not a solid core door, then its skeleton should also be spliced by finger jointing plates, and there is a veneer on the surface as a surface layer, which is "covering".

    If it is made of mixed paint, its surface is generally made of MDF as the surface layer.

  2. Anonymous users2024-01-22

    It's a solid wood door, but the "article" inside is different.

  3. Anonymous users2024-01-21

    That is, only the very thin layer you see on the outside is solid wood, which is the so-called veneer, and the inside is made of wooden strips. It could also be wood-based panels.

Related questions
11 answers2024-03-02

White furniture, white walls, visible main color white, TV wall is green, curtains are floor-to-ceiling pale green, visible color green. This gives you the cool tones of your living room in a mix of green and white. It is recommended that the sofa also be used in green, or a similar color. >>>More

1 answers2024-03-02

Unless you have special needs, you don't need to separate, remember to lean against the wall, if the back of the sofa is a door, people are insecure, as for the separation of the dining room and the living room, it can be separated by the ceiling and wall decoration style, it is not necessary to use something to separate it obviously, and remember that the aisle of the dining room and living room of each room must be left without something to block, and the specific picture must be seen.

1 answers2024-03-02

A layer of sound insulation felt is added to the screw cap on the original top boom, JMG-T50 ceiling shock absorber is used, and then the light steel keel frame is installed, the keel gap is filled with sound insulation cotton, and the Jumao acoustic low-frequency vibration damping sound insulation board is fixed to the keel with self-tapping screws, and the sealant is used to repair the seam for failure protection. If a better effect is required, double soundproofing can be used.

1 answers2024-03-02

It is best to use a constant wide-aperture zoom lens or a large-aperture prime lens. >>>More

3 answers2024-03-02

It's hard to deal with, so the best way is to ask someone to repaint it again, remember to ask the worker to shovel off all the walls to be painted, including the top, so that the painting will not fall off. >>>More