-
It could be that the main pipe downstairs is not smooth, so the water is running slowly, or you have a partially blocked toilet pipe, which could be leftovers, vegetable leaves, or hair. It is advisable to find a repairman and it will be done quickly.
-
Call someone to repair it, a few 10 yuan is OK, very cheap.
-
1.It's unlikely that the tank is not full.
2.The toilet seal is not completely sealed, which is more likely3The flange is not fitted correctly.
4.Your toilet should be a siphon, I estimate that there are foreign objects in the sewer of the toilet itself, congestion, find a dry plumbing or decoration, just take a look at it, the cost depends on the size of the problem, ranging from 50 to 100.
-
Find a toilet to dredge, about 50 yuan.
-
The drain pipe of the flush toilet is generally a straight pipe, and the original U-shaped elbow pipe cannot be continued to be used, otherwise it will affect the sewer.
-
Is the same true for flushing after installation?
If there are two points to look at.
First, it is very likely that the flange is not installed, or the position of the flange is not good, and second, it is blocked, but the possibility is relatively small.
-
Did you remove the backwater bend of your original squat toilet? If you don't take it off, that's the problem.
If the new toilet is installed directly on the drain, then only check that the drain or the toilet itself is unblocked.
In this case, some debris has entered the water valve of the smart toilet lid and blocked the water distribution valve. It is recommended to return to the factory for repair. >>>More
Hello, I am a professional toilet repairer. I saw your request for help, and I don't think it's your cover buttons that are wrong. It's because of the drain of your toilet, because, the gap of the drain is small, and it works by: >>>More
Toilet, the float is broken, just replace it with a toilet float. >>>More
Poke with a leather puff.
If you catch up with diarrhea, don't worry, have you worked? Then go to the unit pull! >>>More