Hello, may I ask if there is something wrong with the flushing of the toilet at our house, and there

Hello, I am a professional toilet repairer. I saw your request for help, and I don't think it's your cover buttons that are wrong. It's because of the drain of your toilet, because, the gap of the drain is small, and it works by:

There is a small pontoon under the total trip, and when there is still water, the pontoon jams the drain and lets it drain, and the water from the tank is discharged to the pontoon, and the pontoon falls without buoyancy, and the drain also falls. Achieve closure. The way to solve it now, 1, check if the pontoon is still stuck on the drain without water.

2. Remove the drain cylinder and thoroughly clean the scale of the drain cylinder, 3. Remove the sealing ring of the drain cylinder and install it on the other side. 4. Check whether the two push rods of the button are in the center of the two semicircles of the drain tube. If it's not a big problem, it can be solved.

By the way, the way to remove the drain is to grasp the middle of the drain and rotate it counterclockwise. can be removed.

I don't know if there is a problem with the rubber pad at the water outlet.

It's a problem with the toilet seat, turn it over, take it apart, change the spring, and if you can't buy it, you can find a replacement spring.

Yes, it is the sealing cover that discharges water in the tank is faulty, and there is a deviation in the falling position after loosening.

This may be a problem with the buttons below, you can change the set, the price will not be very expensive.