What is the reason why the water tank of the flush toilet is full and flows out

It is recommended to adjust the water pressure of the triangle valve next to the water tank a little less, so that the water can be filled. Try. If it doesn't work. Lowering the pontoons in the tank down a little bit should solve the problem.

Two scenarios:

1. If the float in the water tank is a problem, try to dial it to check whether it is stuck, and if it is damaged, it needs to be replaced;

2. The water stop valve of the water tank is broken, you can adjust it manually.

Of course, toilet water parts are generally insured for five years, and you can contact the manufacturer. But first closed the corner valve under the toilet.

When the water in the tank keeps coming in and overflowing, it basically stems from two things:

1. The float in the water tank can not float up, so it can not block the water inlet, and cannot stop the water inlet, so that the water source in the water tank will continue to overflow. Or it can be stuck in each connection part by a foreign object, causing the float to not float.

2. If there is a problem with the water plug or water inlet, although the float can float up and the water plug can be pressed against the water inlet, but the plug is not tight, and there will be water ingress.

Treatment: If the float is damaged--- replaced.

If a foreign object gets stuck--- remove it.

Repair or replace plugs or inlet components.

The water inlet float is broken (or out of range) and cannot be closed within a limited range to make the water overflow Adjustment or repair.

Let's open it and take a look.

It may be that the float has failed, and you can see which link has gone wrong.

How the flush toilet works.

When flushing, press the button on the surface of the water tank, and use the metal rope or nylon rope connected to the water plug to pull up the water plug, at this time, the water in the water tank can convert gravity into power, and the dirt will be washed into the sewer pipe. When the water level reaches the highest point, the float uses the buoyancy of the water to jack up the linkage lever, and the water plug blocks the water inlet and stops the water replenishment.

When the water in the tank keeps coming in and overflowing, it basically stems from two things:

1. The float in the water tank can not float up, so it can not block the water inlet, and cannot stop the water inlet, so that the water source in the water tank will continue to overflow. Or it can be stuck in each connection part by a foreign object, causing the float to not float.

2. If there is a problem with the water plug or water inlet, although the float can float up and the water plug can be pressed against the water inlet, but the plug is not tight, and there will be water ingress.

Treatment: If the float is damaged--- replaced.

If a foreign object gets stuck--- remove it.

Repair or replace plugs or inlet components.

It is possible to put a few bricks in the tank of the flush toilet, but some tanks are hung on the wall, and it is not advisable to put more heavy objects in them. Plastic Coke bottles filled with water can be fixed in the water tank, which can achieve the purpose of saving water with almost no weight increase in the water tank. However, it should be fixed so that the plastic bottles do not flow around and interfere with the operation of other water tank mechanical parts, and the plastic bottles of how much capacity to place should not affect the flushing of the toilet bowl.

However, doing so can sometimes hinder physical flushing, flushing away, or cause clogged water pipes, creating a safety hazard. Especially for toilets under 6 liters, there is no need to place these dongdong.

In addition, if you feel that the toilet tank is too large, you can tie a plastic rope to the horizontal axis of the plug at the bottom of the tank.