-
After installing the pipe of the toilet basin sewer pipe, it was found that the joint between the bottom of the basin and the sewer pipe was leaking, just because you did not take anti-leakage measures or processes during installation, and the solution to the problem is of course the installation specification and waterproof construction measures. At present, the connection between the sewer outlet of the handwashing box and the sewer pipe can be sealed with glass glue, but there are process problems, if the treatment is not good, one is not easy to clean, and the other is that there can be leakage.
It is best to dismantle it, clean it up, re-standardize the installation, pay attention to the process, and ensure the quality.
-
There is no need for raw material tape, no need for glass glue, it is a rubber gasket, it should be a leather cushion that is not good!
There are different installation methods for various types, taking the more common wall-mounted and floor-mounted types as examples >>>More
1.There are three main types of wash basins: wall-mounted type, column type and desktop type. If you want to save space, you can choose the wall-mounted type, that is, the washbasin installed against the wall, the pipeline is exposed, and it is fixed by screws hanging on the wall, which must require the fixed wall to be a load-bearing wall. >>>More
There are different installation methods for various types, taking the more common wall-mounted and floor-mounted types as examples >>>More
1. Bathroom wash basin size.
Bathroom basin size. >>>More
The size of the sink has some minimum control, the minimum width is 550mm, and the 600mm side of the toilet has been reduced to the sink in order to save the empty space. >>>More