-
Highlight the triangle valve from the wall, which is convenient for you to use in the future, and also for the convenience of maintenance in the future.
-
It is recommended that you tighten it in a clockwise direction first, and then unscrew it in a counterclockwise direction, and you must use force for the first time.
-
Of course, it makes sense, because it is convenient for you to replace the angle valve, and the second is convenient for you to go up and down the screws and open and close the angle valve.
Generally, the hot water is on the left, the cold water is on the right, and you can see the faucet yourself, which has a hot and cold logo on it.
There are relevant standards, and the distance between the two needs to be 10-15 cm or more. >>>More
This is a quality problem of Shi Baigong
The renovation contractor should be allowed to carry out rectification. >>>More
The height of the water heater interface is generally between 1.5 and 1.6 meters, and the distance between the hot and cold pipes should not be too wide. I hope my answer can help you.
There is no standard elevation for the water pipes, the duplex faucet is 1 meter from the ground, and the faucet connected to the water heater is 180 meters from the ground