How to dismantle the integrated ceiling in the bathroom

There are many advantages of integrated ceilings, easy installation, and good decorative performance, so now many owners like this kind of ceilings, plus the integrated ceilings have a good waterproof and moisture-proof effect, which is very suitable for wet spaces such as kitchens and bathrooms, and it is very simple to disassemble. So, how to dismantle the integrated ceiling in the bathroom? What should I pay attention to when disassembling an integrated ceiling?

Let's take a brief look at it together.

1. How to dismantle the integrated ceiling in the bathroom.

Remove the integrated board: first use the special tools equipped with the integrated ceiling manufacturer to suck one of the corners of the ceiling, and suck out the air inside, and then pull hard to pull out the corner, and finally repeat the action to pull out the four corners and dismantle them; Removal of the keel: Each integrated plate is surrounded by a secondary keel, which is removed first and then the connected main keel.

Second, what need to be paid attention to when disassembling the integrated ceiling.

1. When removing the ceiling, it is necessary to understand the direction of the internal pipeline in advance, take into account the safety of the internal facilities, and avoid damage to the pipeline or equipment due to the removal of the ceiling, including the kitchen fume pipe, ventilation pipe, heating pipe, etc.

2. If it is a second-hand house renovation, before dismantling the original ceiling, it is necessary to consider safety, if the original ceiling structure has been used for more than 15 years, for safety reasons, it is recommended to dismantle or replace the width, but when dismantling the construction, special attention should be paid.

3. Because there may be the original installed circuit in the ceiling, when removing the integrated ceiling, pay attention to cutting off the power supply first to avoid electric shock accidents.

4. The steps of dismantling the integrated ceiling seem simple, but it is only limited to the removal of the integrated board, and the internal structure is still very complicated to dismantle.

Summary: The above about how to dismantle the integrated ceiling of the bathroom, and what needs to be paid attention to when disassembling the integrated ceiling, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.

The lamp is broken, you remove the lampshade!

If you can't remove the waterproof lamp of the lampshade directly, you need to remove the adjacent board and then remove the lamp.

The method of board disassembly: the integrated ceiling plate is crimping, which requires you to use a suction cup, suck it, pull it down, and you can come down.

How to dismantle the bathroom ceiling, install its steps, do not do it according to the steps is not good, dismantling is the same, then let's talk about its disassembly and assembly steps, the general ceiling will have a fraction, that is, the last piece of installation, as long as you find that piece of fraction can be removed. The last piece of the plastic gusset is directly stuck on it, as long as it moves hard to the direction of the wall, while moving hard, while patting the gusset with your hand, after removing this piece, the others are fixed with screws, and the screws can be removed one by one, and the disassembly method of the long aluminum gusset is the same. The dismantling method of the integrated ceiling is basically the same as the above method, and it should be said that it is easier to disassemble than the above two kinds of ceilings.

The above introduces the steps of disassembling and assembling the bathroom ceiling, you can refer to these to do, I hope it can help you, thank you.

The gusset of the integrated ceiling is stuck in the keel, if there is a suction cup, it can be sucked out in the middle of the gusset, if there is no suction cup, slowly warp a gusset plate on several sides with a knife, as long as a gusset is down, the rest is very simple to deal with.

Use scotch tape or suction cups (generally use suction cups) to the four top corners, glue them on, and pull them down hard. Come one by one.

Slip a knife into the slit and pick it out.

Resell the ceiling and see how it is buckled.