How to write that the toilet button can t pop up warm tips

Updated on Toilet 2024-02-28
2 answers
  1. Anonymous users2024-01-23

    The button cannot be recoiled, please reset it manually after pressing.

  2. Anonymous users2024-01-22

    After flushing, check that the lower flush button pops out.

Related questions
9 answers2024-02-28

The toilet switch can't pop up, just change a toilet switch accessory.

7 answers2024-02-28

Remove the back cover of the toilet bowl and turn it counterclockwise to check for foreign objects in the gap between the circlip sleeve and the button. If there is no foreign object in the gap between the surface, press the button with your finger to feel if there is still a slight rebound force, and if so, insert a thin wire into the gap and stir around to stir the foreign object trapped in the middle. >>>More

5 answers2024-02-28

First of all, it is necessary to determine the cause of the damage of the button, which is that there is a foreign object between the circlip sleeve and the button, which causes the main version of the button card to be damaged. Remove the lid of the water tank, check whether there is any foreign object in the gap between the circlip sleeve and the button, if there is no foreign object found in the gap on the surface, press the button with your fingers to feel whether there is a slight rebound force, if there is, then use a slender wire inserted into the gap between the four sides to stir up, so that the foreign object trapped in the middle can be stirred off. If there is no slight rebound, then the circlip is broken, in this case, you can only replace the circlip, look at the brand and model of the toilet, and go to the mall to buy the corresponding circlip replacement. >>>More

1 answers2024-02-28

Estimate that your toilet is siphon-type. Open the lid of the water tank first (that is, the one with the flush button on it), you will see a small pipe connecting the inlet valve and the drain valve, see if it falls out, and if it falls out, connect it well. If it is connected, it may be that your toilet is a little blocked, not completely blocked, but just a little blocked causing the water to flow when flushing.

3 answers2024-02-28

It is estimated that the spring inside is broken, you can take the upper lid of the toilet directly and put it aside, and then manually block the spout with the piston of that spout. >>>More