How to disassemble the integrated ceiling

Generally, take a suction cup to suck the gusset, and then carefully pull it out.

The integrated ceiling dismantling is very simple, as long as it goes through the three small steps of suction, pulling and disassembly, it can be done, and it is generally equipped with a suction cup when buying a spine, which is used for skin liquid disassembly, as long as it is gently collected on the board, the air is sucked away. You need to suck one of the corners tightly, and then pull it out hard, and pull out the four corners, and you can remove the whole board.

The integrated ceiling dismantling is very simple, as long as it goes through the three small steps of suction, pull and disassembly, it can be done, and it will be equipped with a suction cup when purchasing, which is used for disassembly, as long as it is gently collected on the board burning wild things, the air will be sucked away. To suck one of the corners of the spine tightly, and then pull out the four corners with force, and the whole board can be removed.

Insert a glass knife into any of the four corners of any board and pry it out. Or if you have a suction cup, you can suck it up and pull it down. Remember to pull down or pry, not up.

Or 1. Now a thin utensil is tied with a thin, strong rope.

2. Then stuff the thin utensils into the top from the gap, and then slowly pull it out, (pay attention to the rope with less force and continue to drag the rope up and down left and right) so that the integrated ceiling can be disassembled and integrated in the case of less loss.

Remove a piece of the ceiling first, you will know the structure of the ceiling, and it will be easy to dismantle. You can use a suction cup to suck a corner of a ceiling and pull it down, and then break it off, or use a thin slice to reach into the gap and pry it, it's very simple. But the electrical appliances are a bit troublesome, but as long as the gusset is broken, the rest is easy to say.

If you can't disassemble it well, you can find a decorator to help you.

First remove the gusset, squeeze and suction with a suction cup, and then pull down to take it down, I wish you success!

With a flat blade, stick it into the gap between the plates, and force down to bring the small plate down.

Hello, we are from the home improvement department of Antke Technology, this is the disassembly method, I hope it will help you.

First of all, you need to prepare a flat-headed screwdriver and gloves, then use a screwdriver to insert it into the gap at one end of the ceiling, turn the screwdriver down, and then slowly remove a piece along the corner of the gap by hand, and then remove the other blocks.