How the bathroom should be cleaned

Updated on Bathroom 2024-02-03
2 answers
  1. Anonymous users2024-01-23

    Toilet stains, yellow stains. Sprinkle a cola on the toilet bowl and flush it with water to clean it immediately. Take the high garment soap, pour in warm water and stir well, shake a few times and spray in the mirror. Wipe down the glass and look new.

  2. Anonymous users2024-01-22

    First of all, from high to low, from top to bottom, from the inside to the outside of the orderly cleaning, first from the shower room cleaning, windows, walls, bathroom glass, showers, stainless steel surfaces, shower countertops, water heater surfaces and other surface cleaning. and then to the surface of the glass door outside the shower, the wall, the surface of the cabinet, the door, the mirror, the washstand, the stainless steel surface, the bathtub, the toilet, etc. (Mirror and glass surfaces should be wiped at least three times.) )

Related questions
1 answers2024-02-03

The first step in cleaning the bathroom is to ventilate, turn on the ventilation fan when using the bathroom, and open the bathroom door when the bathroom is not in use. After bathing, it is necessary to open the ventilation fan and the bathroom door at the same time, so as to remove the water vapor faster, and the bathroom that is often not ventilated will cause water vapor condensation, damp walls, mold, and black spots on the faucet. >>>More

9 answers2024-02-03

1. Add a small amount of ammonia to the soapy water to polish the ceramic tiles shiny and bright. >>>More

3 answers2024-02-03

Oxalic acid can be used to clean the yellow stains of bathroom tiles, but the smell is a little big, be careful not to touch the skin, and you can also use toilet cleaning, all kinds of toilet cleaning can be removed.

1 answers2024-02-03

Don't forget to put salt to wash dirty towels and give them a stinky smell. Do not hang wet towels in unventilated restrooms.

4 answers2024-02-03

There are a few common methods you can try:

1. To deal with rust spots, mix salt and vinegar together, stir, dilute the salt in vinegar, heat, dip the liquid with an absorbent sponge or rag, put it on the rust spots, and cover it for more than 20 minutes. Then use a coarse cloth dipped in a salt and vinegar mixture and scrub vigorously to remove. >>>More