If you want to change the color of the old furniture, how to get it, and what is the procedure? Than

If it is solid wood.

Copy the desk, you can still attack, it turned out to be dark red, if you want to brush it into a light color, it is best to use mixed oil, because the mixed oil has strong coverage, and will not reveal the residual red, such a painting procedure is not complicated, you can also do it yourself, the specific steps are like this:

1. Take off the original paint film with paint remover, and then polish it with sandpaper.

2. Because it is old furniture, there may be some bumps, and the unevenness of the surface needs to be leveled.

3. After drying, polish with sandpaper.

4. Brush the paint for the first time.

5. Make up for the defects.

6. After drying, polish with sandpaper.

7. Brush the paint for the second time.

8. After drying, use sandpaper.

9. Brush the paint for the third time.

Generally speaking, it is advisable to mix oil 2-3 times.

Of course you can get it, first of all, you have to polish, then deal with it, and then use putty to make up the place where Kenwo, be sure to use putty, and then polish it after the putty is dry, this time it is to smooth out the putty, and then use a brush to clean up the table (where you want to paint), and then brush it with white paint, brush it 3 times, brush it once to grind the paint, and grind off the kind of particles on the table, because there must be that kind of particles when brushing the first 2 times, When you get to paint for the third time, you have to find a relatively closed place, it's best to clean it up first and then put it in, and then brush the last paint, so much for the program, precautions: you must not use water when cleaning, the paint shop has the kind of rag that specializes in cleaning the floor, you can buy some, brush it with a brush first, and then check it clean, when grinding, you must grind the place you want to paint, don't have too much paint on the brush when you paint, because you are a layman, you can't master the skills, so you have to be less, brush more times, Take your time, and then you can have more when you brush the desktop, but the first 2 sides should not be too much, it is not easy to dry, and it is not good to paint too much on the desktop, and it will crack after a long time. There is white paint in the paint spot, and you can brush it directly when you open it, how can you accompany the putty?

The material is gypsum and paint, water, first find a wooden board, then put on the plaster, pour in the paint, stir well, do not stir evenly, when there is still a small amount of gypsum is not stirred to the paint, put a small amount of water, and then stir, so that the gypsum will rise out, and when it rises, pour in the paint when it has not begun to harden, stir evenly, so that it will not rise again. Okay, that's it, let's give points!!