How do you paint old furniture if you want to change the color?

The color change of old furniture needs to be polished and smoothed with a white grinding du roulette, and then put on a new paint, and the specific operation method is as follows:

Tools required: Specialized grinding wheels.

Plate, wood texture paint, moth-proof, non-woven fabric.

The first step is to polish the surface of the old furniture smoothly with a grinding wheel, as shown in the figure below

The second step is to take a can of wood texture paint of your own color, as shown in the picture below

The third step is to find a piece of non-woven fabric to apply the wood texture paint to the polished old furniture, as shown in the figure below

Step 4: Wait for drying and wipe it with a dry non-woven fabric, as shown in the figure below

5. In this way, the color change of the old furniture is completed, and the effect is shown in the following figure

First, spray the paint remover evenly onto the surface of the furniture.

Dozens of seconds later, together with the skin, it can be easily removed with a shovel.

After shoveling, it needs to be further polished, and it is much easier to polish before it is dry.

After the paint is stripped, it is sanded and then scraped.

Finally, after the furniture is scraped, it should be left in this way for one night, and after it is dry tomorrow, it will be polished and scraped twice.

The last step is to spray paint, and when the ash is dry, the painting begins.

First of all, it must be polished, then cleaned, and then used putty to make up the place where Kenwa was, be sure to use putty, and then polish it after the putty is dry, this time.

62616964757a686964616fe4b893e5b19e31333332626136 is to smooth the place where the putty is filled, and then use a brush to clean the table (the place to be painted), and then brush it with white paint, brush it 3 times, brush the paint once to grind once, and grind off the particles on the table, because there must be that kind of particles when brushing the first 2 times, and you have to find a relatively closed place when you paint for the third time, It's best to clean it up first and then put it in, and then brush the last paint, the program is so much, precautions: don't use water when cleaning, the paint shop has the kind of rag that specializes in cleaning the floor, you can buy some, brush it with a brush first, and then check it to be clean, when grinding, you must grind the place you want to paint, don't have too much paint on the brush when you paint, because you are a layman, you can't master the skills, so you have to be less, brush a few more times, take your time, and then you can have more when you brush the desktop, But the first 2 sides are not too much, it is not easy to dry, and it is not good to paint too much on the desktop, and it will crack after a long time. There is white paint in the paint spot, and you can brush it directly when you open it, how can you accompany the putty?

The material is gypsum and paint, water, first find a wooden board, then put on the plaster, pour in the paint, stir well, do not stir evenly, when there is still a small amount of gypsum is not stirred to the paint, put a small amount of water, and then stir, so that the gypsum will rise out, and when it rises, pour in the paint when it has not begun to harden, stir evenly, so that it will not rise again. Okay, that's it, let's give points!!

Sand it with sandpaper and then paint it in your favorite color.

If the original color is heavy, it can be removed with caustic soda.

It's better to ask someone to get it, don't break it yourself.

In your current situation, you don't need to paint, you can use stickers, wallpaper or advertising paper (you can design your favorite pattern), and it is convenient to change it if you want to change it in the future.

Pay attention to furniture paints.

Pay attention to the paint net.

Good paint, good coating.

It's all in the good paint net.

Sandpaper is used first, and yellow wood is used.

Sanding before painting.

In the polishing twice in a row.

Go directly to the dough room and cover it with a layer of yellow mud, and then make the color you like. But there is one point, the texture of the yellow clay wood is made by hand, and it is not as natural as good-looking.

Grind off the original lacquer and brush it with a brush, be sure to brush it evenly.

The color change of old furniture needs to be smoothed with a grinding wheel, and then a new paint is applied, and the specific operation method is as follows:

Tools required: grinding wheel, wood texture paint, mothproof, non-woven fabric.

The first step is to polish the surface of the old furniture smoothly with a grinding wheel, as shown in the figure below

The second step is to take a can of wood texture paint of your own color, as shown in the picture below

The third step is to find a piece of non-woven fabric to apply the wood texture paint to the polished old furniture, as shown in the figure below

Step 4: Wait for drying and wipe it with a dry non-woven fabric, as shown in the figure below

5. In this way, the color change of the old furniture is completed, and the effect is shown in the following figure