-
Anonymous users2024-01-23Solid wood furniture sanding generally starts with coarse sandpaper, and gradually transitions with fine sandpaper as the effect smooths. Generally, 100 sandpaper is used first, and after sanding, 240 sandpaper is used, and then 360 sandpaper. If the requirements are higher, finally switch to 600 sandpaper, and sanding to this level is basically OK.
-
Anonymous users2024-01-22Just be smooth. Not too much.
There is no ravine, the inside side of the knife (the side that the other hand touches when chopping vegetables) The blade and the knife surface are in a horizontal plane, and the edge of the knife is not sharpened, and the blade is sharp In this way, it is qualified.
In fact, it is not very important whether the primer is polished or not, the important thing is that the middle must be polished. The primer mainly plays the role of masking, leveling and increasing adhesion. Zhongyan must be polished well. In this way, the topcoat will look smooth and flat after spraying, and if the middle coat is not sanded well, a lot of topcoat will be wasted.
The general plywood on the market can be said to be particle board, and the quality is roughly divided into three grades, edge material crushing, sawn wood crushing and waste material crushing, and the main indicators are the use of colloidal grade and glue ratio. The bigger the glue, the greater the pollution.
Ebony and ebony are two different types of wood, and they are not related to each other in any way. Ebony wood originates from Africa, produced in Gabon, Cameroon, West Africa, the wood industry has always been called zebra wood or zebra, the scientific name is referred to as shoe bean wood. Ebony is a persimmon family of mahogany, and the specific details can be learned from some professional mahogany websites, such as mahogany furniture network, Chinese and foreign e-home, Chinese mahogany classical furniture network, etc.
The clean picture at the beginning makes people feel the urge to find love. >>>More