-
Anonymous users2024-01-23Hello, glad to answer for you. It doesn't matter, because the toilet is stored in advance, and it has nothing to do with the water pressure, but only with the loop designed by itself, which is the main factor affecting the smoothness.
-
Anonymous users2024-01-22It doesn't matter, because the toilet is stored in advance, and it has nothing to do with the water pressure, but only with the loop designed by itself, which is the main factor affecting the smoothness.
-
Anonymous users2024-01-21It is too relevant, if the water in the tank is too small, the water tank is installed too low, the water pipe is too thin and the water supply is insufficient, it will affect the smooth flushing.
-
Anonymous users2024-01-20It does not matter. The flush of the toilet is generally the water that comes with the tank. Some bedpans use a delay faucet, the water pressure is large, and the water volume is relatively large, which is related to the water pressure, of course, the flow rate is also related to the thickness of the pipe, and it is not simply to look at the water pressure.
All sewer pipes and main pipes must reach the roof opening, otherwise the drainage will be poor due to atmospheric pressure.
The way toilets are flushed has become particularly diverse with the improvement of technology. >>>More
Quite simply, it is to use the pressure difference of the water to create a flow and carry away the dirt.
Buy a new one and replace it, otherwise the cost of leaking water is much higher than that of the water change valve.
The straight-flush toilet is to use the impulse of the water flow to discharge the sewage, the siphon toilet, the drainage pipe structure presents the "" type, and the pipe is filled with water will produce a certain water level difference, the toilet of the vortex siphon, its flush port is located on the bottom side. >>>More