-
Anonymous users2024-01-23Insert a saw blade or blade into the seam of the plate, pull down near the corner of one side, and pull down the corner of the gusset.
Ultraviolet lamps are referred to as UV lamps, of which ultraviolet is Ultraviolet, referred to as UV. Depending on the band, UV-A, UV-B, and UV-C have different uses.
Nano ceramic electrode fluorescent lamp is a patented electric light source made of permanent ceramic material to replace the previous tungsten electrode. The results of the Jiangsu Provincial Science and Technology Information Station proved that the nano-ceramic electrode fluorescent lamp technology has changed the technical principle, material and structure of the traditional fluorescent lamp.
It has greatly improved the service life of the lamp, and there is no precedent in the world.
The service life of nano-ceramic electrode fluorescent lamps exceeds 30,000 hours, which successfully solves the problems of short service life of traditional fluorescent lamps, and is a replacement product of fluorescent lamps. Lamps made of nano-ceramic electrodes replace incandescent lamps for lighting, and the life is extended by 20 times while saving 92% of electricity; It replaces fluorescent lamps to save 65% of electricity and prolong the life by more than 6 times.
The unique performance of high light efficiency, low energy consumption, long life and dimmable light of nano-ceramic electrode fluorescent lamps is in line with the concept of green lighting. The use of 188W nano-ceramic electrode fluorescent tubes to replace 400W road lamps has already had practical applications and has never been seen before. The eminent economist noted:
Nano ceramic electrode fluorescent lamp technology products are the most profitable projects in the 21st century; Nano ceramic electrode fluorescent lamp, the pride of human science and technology!
1. Insert a saw blade or blade (preferably a saw blade) into the seam of the board, pull down near the corner of one side, you can pull out a corner of the gusset, 2. The above method, pull out the other corner of the same side, you can reach in, press out the other two corners, at this time the gusset plate is completely out, 3, reach out to press out the plate of the lamp, replace the lamp tube, and press it up into the card slot of the keel at a time.
Suction cups are used to remove the buckle plate, and do not use a blade to pry. Any kind of suction cup can be, hook suction cup, mobile phone suction cup, take turns to suck from the four corners of the gusset, don't suck from the middle, it will be troublesome to deform the gusset.
Using a suction cup, suck in, and move away.
Go give it a try, and ask me again if you don't understand. >>>More
The kitchen is an area that we use very frequently in our daily life, and our three meals a day are solved here, so its decoration is particularly important. Kitchen lamps should be brighter, otherwise it will affect cooking. So how do you replace a broken kitchen light? >>>More
There are a total of six steps to get the source ceiling light down: >>>More