-
You can remove the battery, rinse the salt brine with clean water again, and then blow it fully to dry, the fire should not be too strong, and be careful that the shell is deformed. Don't be in a hurry, the inside of the sealed shell dries very slowly. 100% can do it yourself.
-
Did you use it before you dried it? In that case, the whole circuit will be costed, and your machine will be scrapped.
Forget it, you're still ready to change your phone, go to Jingdong and Kuba to see 4S.
Unfortunately, I encountered a similar problem two days ago, and I have negotiated with the after-sales service several times and I have some experience. My little four was soaked in the water and couldn't turn on the machine. After-sales suggested that I put it on the heating for a few days, it still didn't work, and then said that it was basically useless not to open the lid to cool it, and it was necessary to open the back cover for more than ten days, and there may be a 5% chance of being able to turn it on. >>>More
It may be damaged by immersion, or it may be too inward for the sound to be heard.
It's okay, wait for it to dry and try to turn it on, there was no big problem at the time, and it turned off again. The motherboard shouldn't break. >>>More
To shut down.
If the hands-on ability is okay, you can remove the back shell and dry it with a hair dryer. >>>More
Step 1; If you drop the iPhone in the toilet, immediately scoop up the phone. Step 2; First of all, pay attention not to turn on the power at this time, if it turns out to be on the toilet in the state, turn it off immediately. Step 3; Remove all the covers such as the iPhone case; Quickly get off all the phone covers, phone films, etc. >>>More