-
Anonymous users2024-01-23It depends on your specific style, the process is complementary to the modeling, and you can't speak alone!
The general practice is visual avoidance and decorative stickers. >>>More
The three-in-one fastener + wooden pin connection method is the best, which is easy to install; Disassembly, firmness is also reliable (must be on the wooden pin).
There are also single-angle connectors, double-angle connectors, corner codes, cabinet screws, etc.
Needless to say, the three-in-one connection method, we all know that the wardrobe back panel depends on what thickness you use, if it is a 9MM back panel, you need to groove on the 2 side panels and the top and bottom plates, and then the 9MM back panel is embedded in it, if it is an 18MM back panel, it needs to be wrapped by the side panel and the top and bottom plate to install the row holes, so that in addition to the wardrobe and the back of the wardrobe, other directions can not be seen, in addition, it should be noted that if the 9MM back plate is used, According to the size of the wardrobe, you need to use 1 or several pull strips to connect and fix it in the middle.
Cabinets are generally calculated by meters, large cabinets such as wardrobes or bookcases are generally counted by squares, and bath cabinets are counted by sets.