How to pull a new 4 square line socket for the bathroom

If the socket in your bathroom has not been changed, you can use the original (the current building construction) hidden pipe, and it is okay to wear a set of wires. You can try, pull the wire in the toilet socket, see if the first dark box is moving, one by one, see if it can be all the way to the distribution box, if you can move, you can thread the wire, if you can't move, you can't wear the wire. The cloth line is really not good-looking, decide for yourself.

Directly in the main switch box of the power supply to install a line to the kitchen or bathroom, the 4 square line can be used for high-power appliances such as water heaters.

If the renovation has been completed.

Can only be surface-mounted. You can use conduit or trunking.

If you want to play a sub-frequency room meter socket in the bathroom, then pay attention, this socket must be waterproof and explosion-proof, only in this way is it safe in the bathroom.

If you install a new socket, you have to re-route the pipes and wiring, if you are a new house, you can pick the groove and install the junction box before the wall is waterproof, and there is no way to renovate it.

If the bathroom has been built, it is recommended to pull the open wire, find an electrician, will get the 3 plugs nearby, and then connect the wiring, if you want to install a dark wire, then you can only knock, and then go on the heavy plug, if you don't want to go from the plug to see if there is a spare wire left in the main switch.

If the decoration has been completed, then it is necessary to walk through the pipe with open wire, and the socket also needs to be pressed to open the socket.

With external threading.

The bright line is fine, but the dark line can't be pulled.

Try wiring from the main power supply or the air conditioner power supply nearby.

How to pull a four-squared special socket for the bathroom, this should be very simple.