-
Anonymous users2024-01-23First, the floor drain is not odor-proof.
Second, the bottom of the basin is not effectively deodorized, there is no U-bend, or there is a U-bend but the interface is not sealed.
3. The expansion screw holes at the back or on both sides of the toilet are not properly sealed (the floor drain and basin have been solved, but there is still a smell, please check).
Method: In the first case, the sealing of the floor drain is not good, so it is better to change it and change it to an odor-proof floor drain. You also need to clean frequently, ventilate frequently, and keep the bathroom clean, tidy and hygienic!
In the second and third cases, it is more troublesome, first to find the root cause, and then to deal with it. Seal the interface with glass glue, if you don't want to use glass glue, you can also use a plastic bag to wrap the interface tightly. Disassemble the toilet bowl and reinstall it or adjust the position of the seal.
-
Anonymous users2024-01-22Go to Taobao to buy a six-proof floor drain and anti-odor core, and you're good to go.
The first thing in the dark bathroom is ventilation, install exhaust fans, and the second is to install lights
1. Find out the cause of water seepage on the wall, and then take the right measures to deal with it. If the water pipe is leaking, it is necessary to find the leakage point of the water pipe, and if the waterproofing is not done well and causes water seepage, then it is necessary to do a good job of waterproofing the wall. >>>More
The waterproof sealing effect of the bathroom floor slab is relatively good, and the key to dealing with the problem of water leakage is to accurately find out the leakage point. The leakage point mostly occurs in the upper and lower water pipes, the junction of the floor drain and the floor slab, clean it up after finding the leakage point (the cleaning range is larger than the leakage range) and make it dry, and seal it with sealant. It is better to work from the floor slab, or from the roof if it is not convenient. >>>More
If the construction hole is not properly treated, cracks will form around it. In order to prevent the occurrence of cracks, the following construction techniques should be observed in addition to the above-mentioned filling methods. >>>More
The interior wall of the bathroom must be waterproofed because it has been exposed to water and humidity for a long time. Wall tiles are a common surface waterproofing treatment, but waterproofing needs to start from the base layer. Cement-based waterproof coatings and polyurethane waterproof coating films, etc., which are common in construction, can be used on the rough wall of the toilet to fundamentally solve the problem of anti-leakage of the wall of the bathroom. >>>More