How much can a toilet shifter move

Updated on Toilet 2024-01-27
2 answers
  1. Anonymous users2024-01-23

    The moving distance of the shifter is generally 10 cm, and the thickness does not need to be calculated, because the toilet cannot be raised, and it cannot be installed if it is raised, so you can only dig a hole in the floor, dig it according to the height and size of the shifter, and dig it until it can be installed.

  2. Anonymous users2024-01-22

    THE SHIFTER CAN USUALLY MOVE 5CM-10CM, AND THE SPECIAL CAN MOVE 10CM-15CM, BUT THE THICKNESS OF THE SHIFTER ITSELF IS LIMITED, AND IT IS EASY TO HANG DIRT IN USE, WHICH SERIOUSLY AFFECTS THE USE OF THE TOILET.

Related questions
How much does a toilet shifter cost?
2 answers2024-01-27

About 8 15 yuan, it is not recommended to use a shifter, because the use of a shifter will affect the flushing effect of the toilet, it is recommended that a professional plumber transform the sewer pipe. >>>More

Are toilet shifters good?
4 answers2024-01-27

The size of the toilet shifter is generally 10cm 20cm

The toilet shifter is generally used in the following situations, and the pit distance in the bathroom (referring to the vertical distance from the center of the sewage pipe to the wall) is non-standard (the standard is 300mm or 400mm), then the shift is needed to move. >>>More

Are toilet shifters any good?
20 answers2024-01-27

Toilet shifter: also known as offset, drain shifter;It is mainly used for toilet installation, because the position of the toilet wall and the sewage outlet is fixed, and the selected toilet sewage outlet and the lower sewage outlet do not correspond to the position of the pipe fittings used in the case of incomplete docking. >>>More

The toilet shifter is clogged
2 answers2024-01-27

Originally, the shifter is a troublesome problem, and there are often problems with poor drainage, so it is recommended to consider resetting. If it really has to be moved, it can only be opened, unobstructed, and if the economy allows, change to a toilet with a large punch.

Toilet shifter installation issues
4 answers2024-01-27

The toilet shifter is usually installed by lowering the plane of the original sewer pipe to make up for the installation height of the shifter (about 6 cm), so that the toilet is still installed at the height of the ground, if it is higher than the ground, it is usually used to make the plane with the height of the shifter, and then install the toilet at the height of the bottom of the toilet and its squatting range.