How to renovate and paint wooden furniture

Hello furniture is among other things can be renovated.

And after refurbishment, frequent ventilation and odor can be.

After the furniture is painted, the effect is similar to that of new, but you need to beat the furniture before renovation, wipe it clean, sand it again, and then paint it.

And the effect is not very good once, this paint has to be brushed two or three times repeatedly to color better.

The color of the first pass is lighter, and after the first time it is dry, then brush it for the second time, and then brush it for the third time or three times after the second time is dry, and the effect is the best.

And don't put your stuff right away after it's dry, but wait for the smell to be put on for two or three days, and then you put the stuff you want to put in.

Generally, if you want to buy it, you will buy the water-based paint.

And this kind of paint sells more online, you can buy it online, choose a favorite color, the online price is cheaper, and the price is at least twice as cheap as the price in physical stores.

The furniture was refurbished and the color was kept for a long, long time after the painting.

When I renovated, I simply bought a bucket to Weiwei wood paint, and brushed it directly, and I felt that the effect was quite good, the paint film was very hard, friction-resistant, and there was no pungent smell.

Thank you for knowing that the Chinese New Year's Eve general law role model can be specific, I am ready to DIY.

With banana water. Paint stripper or acetone wash off the old paint, and the defects are repaired with wood ash and 502 to refresh the paint.

1.Remove all the old paint and repaint it;

2.Where there is a defect, where to repair the paint; Sand and repaint.

Now it is to advocate environmental protection, you can choose water-based wood paint to help change the color of wooden furniture. The excellent water-based wood paint is quite good, simple and easy to construct, and the specific construction operation is as follows

Start by choosing what color you want to paint.

Antique lacquer is translucent, if there is originally a wood grain to show the original wood grain, polish it first, it also has to increase adhesion. Solid paint can be directly covered, and the color is more vivid.

If the surface of the construction is relatively smooth, you can brush the primer first to increase the adhesion Brush the primer 2 to 3 times every 3 hours or so After 12 to 24 hours, you can brush the color you want to brush 2 to 3 times Every 3 to 5 hours Finally, 48 hours of construction, you can brush a varnish again to play a wear-resistant and waterproof role Brush 2 to 3 times Every time about 3 hours Try to avoid collision after brushing the varnish 3 days The surface is dry 7 days The paint film reaches the best hardness

Suggestion: If the paint is thicker, you can add less than 10% of the water to dilute it

Step 1 : If you want to paint the furniture yourself, you must first choose sandpaper of the same type according to the roughness and hardness of the wood surface.

Step 2 : Brush the primer, adjust the consistency of the primer according to the density of the wood, hardwood is dense, the paint can be diluted a little, and the softwood should be thickened.

When painting, it should be evenly painted along the texture of the wood, not too thick, and sanded with sandpaper after it is completely dry until it feels smooth and has no protrusions, wipe it several times with a damp soft cloth, and finally wipe it dry.

Step 3 : Brush the second coat of paint, whichever is the first coat of paint, and then gently and evenly sand with sandpaper in the direction of the brush.

Step 4 : It is to paint the furniture for the third time, and then use a finer water sandpaper dipped in water to polish, not too strong, and the polishing should be even.

Step 5

Tips for painting furniture yourself

Furniture with mirrors or glass, which can be pasted with adhesive strips or newspaper to avoid paint. Paint the recessed area first, from the inside to the outside to the edges, and avoid dripping paint around the edges.

Brush the more hidden areas first, such as the inside of the cabinet, and then brush the surface. Don't be too impatient when brushing the paint, you should brush slowly and sequentially to prevent bubbles, and if there are bubbles, they will burst immediately.

Ensure the cleanliness of the construction environment, if the surrounding area is not clean enough when painting, the dust in the air falling in the paint will make the paint surface feel particles. Necessary items for painting: adhesive tape, paint brush, mask (to reduce inhalation of harmful gases), glasses (to prevent paint from dripping into the eyes).

Generally, it is brushed three times, the first time is brushed to increase the penetration depth of wood wax oil, and it is slowly dried after brushing; Then brush it again and use the method of wiping, which can save the amount and then dry; Wipe the surface of the workpiece with a clean cotton cloth immediately after brushing it again to dry, which can make the surface of the furniture smoother, increase the number of wipes, and polish with fine sandpaper one by one, you can get the effect of high-end furniture.