-
Anonymous users2024-01-23Hello, the first is dry hanging, this method is to fix it on the wall with bolts first, and then groove it on a piece of stone, fix the stone with a T-frame, and then fix the T-frame and bolts together, so that the marble wall has a certain distance from the wall itself, but the fixation is good. Therefore, if the location of the bathroom is sufficient, this method is recommended to stick to the wall.
The second is wet paste, which should first make a layer of steel mesh on the wall, and then use concrete wet paste. This method also has a better bonding effect, but it is also relatively more troublesome.
The third method, which is also relatively simple, is to paste directly. Generally, it is divided into dot paste and face paste. The surface application method is suitable for thin stones, the thickness is less than 8mm, the weight is about the same as that of wall tiles, and it can be pasted with special mortar.
Point paste is the use of stone special glue, the range of the point can not be greater than 25cm, the amount of the point can not be less than 3-4cm, the thickness of the viscose is above, this way is used for slightly thicker stone. However, the direct paste method is not suitable for the bathroom, because the bathroom is mainly based on light walls, the degree of deformation is large, and the bathroom is often damp, and after a long time, the glue is easy to age, and it is easy to have accidents.
Brush it with a wire brush for rust removal first, and then use an angle grinder to install a coarse cloth wheel for polishing. >>>More
This can be done, but now many people are users of this kind of goose soft stone tiles, rather than a goose soft stone arrangement, if it is really an arrangement, it is time-consuming and laborious, and it is not good-looking and easy to open the glue. It is inconvenient to clean. So it is recommended to use tiles with this goosestone effect.
1.Because the waterproof wallpaper paper is based on PVC, and PVC often uses lubricants, auxiliary processing agents, pigments, impact inhibitors and other additives in use, if it is not reasonably added, it will release harmful gases, thereby causing harm to human health. >>>More
Matte bricks can be used on the bathroom floor, compared with bright bricks, matte slip resistance will be better. >>>More
Generally, all the tiles below the ceiling are pasted, so beautiful and generous, and choose a row of tiles with pictures, which is better looking, about 2m on the top, and pay attention to the position of your bathroom sewage pipe when pasting.