There are cracks in the toilet tank, and what glue can be used to glue it

Cracked toilet tanks can be repaired with tile repair glue.

Use the glue needle tube to evenly squeeze and move along the gap to fill the gap (the gap can be inserted into the gap), the gap is too small to press and push into the gap, this should be pushed and pressed many times to increase the amount of glue into the gap, so as not to continue to leak in the later stage of the repair surface is too thin. After the filling is completed, wait for 24 hours to fully solidify before it can be used, and it must not be used with water during the period.

Glass glue because glass glue is sealed and waterproof. Glass glue is divided into two types according to its performance: neutral glass glue and acid glass glue.

It is generally used for home improvement bonding. The places where glass glue is generally used in home decoration are: the dumb place behind the wood line, sanitary ware, toilet, makeup mirror in the bathroom, the gap between the sink and the wall, etc.

The adhesive of neutral glass adhesive is relatively weak, and it is generally used on the back of the bathroom mirror where there is no strong adhesion. Neutral glass glue is used more in home decoration, mainly because it does not corrode objects, while acid glass glue is generally used in the dumb part of the back of the wood line, and the adhesion is very strong.

1.It is recommended that after the water tank is thoroughly dried, use AB glue to seal the inner body first.

2.After the process is over, use transparent glass glue to seal it again after drying, which is the best way.

This kind of repair glue has two main requirements, one is sticky, and the other is to be able to withstand water.

I met almost two years before last, the effect is OK, the relevant special glue was not found, I was looking for the laundry pool leakage special glue, the effect is OK, it cost 29 yuan at the time, it is hard after curing a bit like porcelain, and it is still in use.

However, the brand name is forgotten, you can search for it yourself, and you should be able to find the relevant laundry pool leakage glue. As long as the material category is correct, the difference in effect should not be large.

It is glued with Jinshida multi-functional soft glue, and the bond is firm. It works well. Available online.

Cracks to see whether you use a ceramic toilet or a plastic steel toilet, generally more ceramic, if the gap is large, first turn off the water main valve, put the toilet water out, wipe dry, dry and then use marble glue + curing agent (quantitative, add more coagulation blocks within a few seconds) to stir evenly and apply to the cracks on the inner wall of the water tank. If the gap is not big, first turn off the water main valve, put the toilet water out, wipe it dry and dry, go to buy a nail-free glue + glue gun, come back and squeeze it to the crack to smooth it slightly with your fingers.

The split toilet looks like a 1300 yuan, and the water tank is ceramic, and there is no glaze at the bottom and inside. When I got on the tank, I accidentally tightened it and made a crack at the bottom of the tank, which leaked.

After repairing it with epoxy resin, it has been about 5 months since then, and it was found that it was seeping water again. I don't know if the following whimsical methods are feasible, ask for advice.

1.JCDecaux Water Leak No. 1 is pasted from the inside of the water tank as a whole to do rigid waterproofing, and then brushed with flexible waterproofing after finishing.

2.Neutral silicone glue is pasted throughout the inside of the tank.

3.Black & Decker strong repair cement is pasted over the cracks and around them. - It's too expensive, it's better to get a new tank for a full paste.