-
Anonymous users2024-01-23It can be glued, you can stick it when you buy a Weigang nail-free glue, it can plug the seams, and the adhesion is very strong.
-
Anonymous users2024-01-22Glass glue is OK, because glass glue is used for sealing and waterproofing.
-
Anonymous users2024-01-21Marble glue, put the toilet water clean, wipe dry, cool dry and apply marble glue. Marble glue barrel glue comes with a small tube of curing agent, and it must not be too much at one time to avoid waste.
This is due to the cracking and leakage of the interface between the toilet flush and the sewer pipe, it is best not to repair it yourself, ask a plumber to repair it, there is not much work, it is estimated that it is less than 50 yuan. >>>More
If it is a fine crack, you can use the good glue of the brothers to bond, the good glue of the brothers can only be used after the mixture of A and B two kinds of glue, open the lid of the two glues, squeeze out the same amount of glue, use a toothpick and other small sticks to mix the two glues and put them in the place where the toilet has cracks (the action should be fast) and wait until the glue is dry. This method is very effective for repairing small cracks. You might as well give it a try, but the appearance is not so beautiful, hehe!
First, soak your pants in warm water for 15 minutes, add some laundry detergent or detergent, and then scrub them vigorously.
Hello, use a special leak plugging waterproof double-sided tape, similar to bubble gum, use a hammer or something to punch in!
If you don't mind the appearance problem, you can use the kind of glass glue under the toilet bowl that is in contact with the floor. >>>More