How to close the kitchen sewer PVC interface if it is not strict?

Updated on Kitchen 2024-01-27
3 answers
  1. Anonymous users2024-01-23

    It can be mixed with plugging king and PVC glue to apply to the location of the seal that is not tight.

    You can mix cement and PVC glue, apply it to the place where the seal is not tight, and then cover it with dry cement.

    You can use a pipe fitting that is slightly larger than the PVC pipe fittings, apply PVC glue, and put it on the part where the seal is not tight.

    PVC-U) adhesive has simple operation, high bonding strength, good sealing performance, cold and heat resistance, and strong media resistance. PVC glue is the bonding of PVC pipes and fittings used in construction, electrical conduit, agricultural irrigation, industrial sewage and other projects. Bonding between PVC plastics, e.g. for children's toys.

  2. Anonymous users2024-01-22

    It can be repaired with the same type of PVC pipe, with U PVC adhesive. If it is with sealant, replace it and put on a water cloth.

  3. Anonymous users2024-01-21

    Hello: According to your problem, I propose the following solutions: 1. Prepare a slightly larger PVC pipe (A), and then, wipe the water of the leaking pipe (B) clean, saw a section, apply glue to the inside of pipe A, and glue the outside of pipe B, and then put it together. Once the glue is dry, it is ready to use!

    2. Use the "raw material belt" to wrap a few more times around the leakage.

    Have fun

Related questions
1 answers2024-01-27

Go buy a special hose belt, the kind that costs one yuan, and wrap it around the interface until it can be connected tightly.

3 answers2024-01-27

If the tube is too dirty, it is likely that the glue will not stick firmly, so it is recommended to twist a small self-tapping screw at the interface after the tube is reset, put the two tubes together, and then wipe the water and then apply sealant. It's foolproof.

5 answers2024-01-27

What if there is a leak in the kitchen drain pipe? First of all, we need to check the kitchen drain pipe to see where the water leak has occurred, if it is because the interface with the sink is loose, tighten it, you can also use a cloth tape coated with adhesive, wrapped around the interface with the sink, and then do not use this water pipe for drainage, wait until the next day, if it is still leaking, and the water pipe is not broken, then you might as well try to replace the new water pipe, many times, it is caused by the aging of the water pipe.

1 answers2024-01-27

The sink is the most important transmission tool for kitchen sewage and is an indispensable part of the kitchen. What do you do if your kitchen sink is leaking? First of all, we need to find out the exact cause of the leaking kitchen sink. >>>More

3 answers2024-01-27

First prepare a movable wrench, Phillips screwdriver, the specific steps are as follows: >>>More