What to do if the valve of the toilet bowl is broken

The toilet inlet valve is broken, and there are the following solutions:

1.If the economy is good, you can ask the property or special toilet repair to change, the cost is a little higher;

2.For a different set, online shopping is also possible, but before buying, you must understand what model you need to buy;

3.Let's first see if your home toilet is split or connected;

4.Follow these steps to install the tank inlet kit:

1) Remove the base and nut of the inlet valve;

2) Align the water inlet hole of the water tank and insert the lower end of the water inlet valve;

3) Put on the plastic gasket and nut and tighten it firmly. It is very important here, there must be a gasket, it must be tightened, it must not leak, and the accessories sent must be used anyway;

4) Connect the water inlet hose of tap water and tighten it.

The float in the tank drives the water inlet valve of the water tank, when the float floats up and the valve is not closed, and the water continues to enter, it must be a problem with the valve, so you have to check the valve, whether the link between the float and the valve is loose, or the valve is broken, and then it is easy to deal with.

If it is an old-fashioned float tank fitting, it may be that the height of the float is not adjusted properly, or the valve for water inlet is open.

If it is a new tank fitting without a float, it may be that the water inlet part is too tight or fails.

Actually, it's a very simple thing, but the text is not very clear. Generally, toilets come with installation instructions for tank fittings, you can look at the manual, or go to a building materials store to find one.

If it doesn't work, and your home is an old-fashioned float tank fittings, it is recommended that you buy new tank accessories and find someone to replace them, the price of the tank accessories is about 30-50 yuan.

If the float valve is stuck, open the upper cover of the toilet bowl, pull the float up into place, check the cause of the stuck dead point and clean the dirt in the tank.

Working principle: after pressing the flush switch, due to the drop of the water level, the float falls at the same time, when the float reaches the lower limit, the water injection switch is turned on, and the water is automatically loaded, although the water level rises, the jacking is lifted by the water, when the float reaches the upper limit at the same time.

Go to the hardware store and buy an angle valve and install it on the inlet pipe of the toilet. The price is not expensive, about 20 yuan, just screw it on. Find another toilet repairer and replace the water in the tank.

Hurry up and change the water valve, it won't cost much! It's harder to shout people, and you're a small problem, and plumbers are generally not happy to get it! It's not good to charge more money for small problems, and it takes some time to get it if you collect less, and it's troublesome if you don't get it well!

You go to the plumbing shop to buy a water valve and talk to the boss about the problem, and let him teach you how to cut the door, a water valve is about 10 yuan! If you really can't do it anymore, you can ask the boss to help you find a plumber, speak politely, talk about things urgently, and negotiate the price better!

You're an old-fashioned house, but it's too irresponsible to decorate the toilet valve for you!

Let's find someone to replace the damaged water in the toilet.

Buy a switch, it's easy to get.

Learn to change or find a property on your own!