How far away is the kitchen sink from the drain pipe?

Updated on Kitchen 2024-01-28
5 answers
  1. Anonymous users2024-01-23

    Put the sink drain hose into the hard pipe interface, and connect the hard pipe to the past, if you pass through the cabinet, you need to open a hole! Walking the hose can easily cause the hose to sag and the water is not smooth!

  2. Anonymous users2024-01-22

    The sink or cooktop should be at least 40 cm away from the side of the wall to have enough space for the operator to work freely. This free space can be connected with a worktop to create a convenient and useful working platform.

    The quality of the kitchen sink installation is directly related to the daily life of the family, so it is very important. There is a lot of knowledge to install a sink, and the distance between it and the sewer pipe is also very particular.

  3. Anonymous users2024-01-21

    The general design is that the sink is with the window, the water is not a problem, and there is a skirt 100mm off the ground under the kitchen cabinet, which can be walked over.

  4. Anonymous users2024-01-20

    The point is that the platform on the sink is 80 cm above the floor, and your sewer pipe is 20 to 30 cm above the ground, and it can't be any higher.

  5. Anonymous users2024-01-19

    How to install the kitchen sink from the sewer pipe.

    1.Disassemble each accessory and simulate the installation according to the position of the wash basin, and install the general shape first. At this time, the individual screws should not be tightened too tightly.

    2.After checking that there is no error, add gaskets or install various leather pads at each screw mouth in turn. Be sure to install it in a clear order and position.

    3.Remove the broken parts of our washbasin. Be careful not to scratch your hands.

    4.Install new components and pipes under the basin, the recommended installation sequence is to start with the main basin and then install the secondary basin.

    5.Install the return pipe at the drain opening between the two sinks.

    6.If the sewer pipe at the end is not long enough, you can buy another section and install it.

Related questions
2 answers2024-01-28

Add a section of sewer pipe to the hose length.

4 answers2024-01-28

Put the sink drain hose into the hard pipe interface, and connect the hard pipe to the past, if you pass through the cabinet, you need to open a hole! Walking the hose can easily cause the hose to sag and the water is not smooth!

12 answers2024-01-28

The ash pipe itself is PVC, and it must be glued with PVC glue, which must have been installed before without glue. >>>More

8 answers2024-01-28

You just have to measure from the wall all the way to the middle of the sewer, this is the hole spacing, buy according to that hole spacing, there will be no problem.

1 answers2024-01-28

Hello, kitchen sink drain pipe installation first step: install the drain filter basket. >>>More