What to do if the kitchen sink is too far from the drain pipe, from side to side

Updated on Kitchen 2024-01-27
4 answers
  1. Anonymous users2024-01-23

    Put the sink drain hose into the hard pipe interface, and connect the hard pipe to the past, if you pass through the cabinet, you need to open a hole! Walking the hose can easily cause the hose to sag and the water is not smooth!

  2. Anonymous users2024-01-22

    It must not be an open pipe, but only a dark pipe to go to the wall, the sink water is connected to the wall water pipe, and the water pipe goes to the wall to the sewer at the other end and then comes out, and it is convenient for the sink to be launched at a slightly oblique angle. Pay attention to washing things yourself, make a water leak, and it will be very troublesome if it is blocked.

  3. Anonymous users2024-01-21

    The sewage hole, three meters away from the washing tray, is there a matching pipe?

  4. Anonymous users2024-01-20

    This is not easy to solve! If the floor cushion is high enough, you can go to the pipe, but you must consider maintenance, otherwise it will be troublesome if the pipe is blocked for such a long time! Why not put the sink down in the plumbing position! The best strategy is to lower the water pipe position.

Related questions
11 answers2024-01-27

What kind of plastic pipe fittings are combined? Connecting a rotating plastic-like interface? If they then unscrew the parts of the water, rinse, and then assemble in turn, do not feel dirty after from home. >>>More

16 answers2024-01-27

If the kitchen drain pipe is blocked, you can use a pot of hot water and dish soap to rinse, or you can use a pot of hot water and some edible alkaline noodles to mix and flush the drain, and the effect is very good.

6 answers2024-01-27

Practical workaround:

Pump dredging method: When the kitchen drain is blocked, you can plug the hose of the pump into the drain, and then put in a small amount of water, and constantly pump air into it, and the pipe can be dredged. >>>More

6 answers2024-01-27

Clause.

1. Usually, the clogged sink is mostly due to the accumulation of debris at the U-shaped bend of the sewer pipe, resulting in poor drainage. If it is a sewer pipe with a sewage screw, remove it directly (to prevent staining the cabinet, it is best to pad a sewage basin at the bottom), after removing, dredge it with iron wire and steel wire, and it should be able to solve it smoothly. If it has not been solved, it may be necessary to remove all the sewer pipes, remove all the plastic connections, rinse them, and reassemble them, which I believe will not take more than 30 minutes to complete. >>>More

1 answers2024-01-27

Causes of leaking water in the sink sewer pipe.

Water leakage is due to these reasons: leakage of the faucet outlet, leakage of the gap under the faucet bolt and leakage of the joint of the faucet joint. If the kitchen faucet leaks are the cause of these aspects, we can try to solve it ourselves. >>>More