What to do if the kitchen sink drain rubber mat is aging and leaking

The ash pipe itself is PVC, and it must be glued with PVC glue, which must have been installed before without glue. >>>More

Now come to the kitchen sink sewer pipe varieties are annoying, the purpose of the pipe bending is to store water and prevent smell, also known as the water storage bay, your kitchen sink sewer pipe is too long, allowing for backwater, personal opinion, is also the easiest way is to paint the white PVC pipe color part of the mourning, the gray hose can be inserted.

When installing the drain of the kitchen sink: 1. The place where the basin is connected should be made of glass glue; 2. The place where the basin is in contact with the countertop needs to be sealed with glass glue for sealing and waterproofing, and the middle part of the pipe has a special rubber pad connection, and if there is no leakage, there is no need to play glass glue; 3. The sewer pipe needs to be glued with glass. Turn the horizontal drainage pipe into a vertical one, add a short pipe to the elbow mouth, put the thin pipe in, plug something in the gap, and seal the mouth with glass glue.

Causes of leaking water in the sink sewer pipe.

Water leakage is due to these reasons: leakage of the faucet outlet, leakage of the gap under the faucet bolt and leakage of the joint of the faucet joint. If the kitchen faucet leaks are the cause of these aspects, we can try to solve it ourselves. >>>More

Hello! The best length should not exceed 1M, which is generally within the range of the drawer. Generally, it does not affect the drainage within 3 meters. The sewer pipe should be connected with PVC pipe as much as possible, and the 90-degree elbow should be used as little as possible, and the 45-degree elbow should be used where the elbow is needed. >>>More