How to deal with my balcony leakage?

I believe that some people have encountered the trouble of water leakage in their homes, which not only damages the roof, affects the service life of the house, but also affects our lives. The balcony is the place where we often dry our clothes, so the balcony is easy to accumulate water, and if the balcony leaks, it will bring immeasurable trouble, so we must do a good job of balcony waterproofing facilities. Balcony waterproofing is divided into balcony window waterproofing and groundproofing, balcony window waterproofing needs pay attention to the quality of the window, sealing, the direction of the frame, which is the first step of balcony waterproofing.

The waterproofing of the balcony floor ensures that there is a slope on the floor and that there is a height difference of at least one to two centimeters between the interior space and the adjacent interior.

There are two ways to deal with balcony leakage, but you should take a serious look.

After the glass glue treatment, the inadequate construction of the glass glue may cause water to penetrate through the gaps. The service life of glass glue is limited and easy to age, and it falls off and causes water seepage: 1. For marble to absorb water, you can use a waterproof guard 1:

3. Spray the surface of the marble with water dryness, so that the marble can fully absorb the waterproof material, and the water seeps into the room to check whether the gap between the marble and the corner of the wall is not repaired, and you can use black gold steel joint treasure or gold steel glue to apply it to the gap.

2. Check what the specific location is when the water leaks downstairs, if it is water seepage at the corner joints, or water seepage at the joints of the drainage pipes, first check whether the glass glue is intact, because the life of the glass glue is limited, it can be shoveled off.

In dry cases, spray the whole thing with a roofing spray first. In the seam treasure A:B = 2:1 stir evenly and apply it to the joint, if it is water seepage at the joint of the drainage outlet, spray the roofing spray first, and then wipe the gap with the seam treasure.

If you really don't know how to get it, you can find the after-sales service of the decoration company and ask them to send a master to help, which is generally charged.

First, the leakage first to find the leakage, so that the leakage can be targeted, but also save materials and costs.

2. If the leakage point is located in a stable position, it will not be changed by the change of thermal expansion and contraction of the structure, and it can be solved by simple treatment of the waterproof mortar by plugging the leakage king. If the leakage point is located in a position that changes due to the thermal expansion and contraction of the structure, such as wall corners, joints between plates, etc., it is necessary to use elastic waterproof materials.

1. To find the original waterproof layer, because the waterproof layer will not be exposed, in the lower part of the surface layer, the surface layer must be removed first, so as to better find the original waterproof layer. After the original waterproof layer is removed, leveling, and then draining the water in the insulation layer below, and the exhaust hole can be used to do a good job of exhaust measures to drain the water of the insulation layer.

2. If you want to make a waterproof layer, you must block the waterproof layer, and the root-blocking waterproof layer has a modified asphalt membrane root-blocking waterproof layer, as well as a polymer membrane root-blocking waterproof layer. The window crack is a place that is easy to seep water, so the waterproof treatment should first remove the filling and debris between the window frame and the wall, and then inject foaming plugging agent into the gap, and then apply a waterproof coating no less than 30cm wide and thick around the window frame.

3. Make sure that the ground has a slope, and the lower side is the drainage outlet. At the same time, make sure that there is at least a 3cm height difference between the balcony and the living room.

4. Install a high-quality floor drain, although it is a small accessory, but its quality will affect the ability of drainage, and the water can be drained away in time during heavy rain, so as not to flow back into the room. For balconies with serious leakage, the waterproofing should be redone, especially the waterproofing of the top surface and the wall. It is also possible to add a water baffle above the wall to reduce the impact of rainwater on the infill layer between the window and the wall.

When repairing, good sealing materials should be selected, and all leakage points should be carefully sealed.

Hello, the simple way to deal with the leakage of the window sill in general is:

1. Clean the base surface and moisten it thoroughly.

2. Fill the gaps with caulk if there are obvious cracks.

3. Brush three to four times with acrylic high-elasticity anti-crack waterproof coating along the aluminum alloy frame, and the next time the surface can be painted after each surface drying.

Note: If there is an anti-theft net, the nail that fixes the anti-theft net must be sealed with paint.

In fact, it is better to find a professional to help you deal with it! In the future, choosing a better decoration company before decoration will also reduce this kind of problem!