How to deal with water seepage on my balcony?

Many hotel toilets, bathtubs, basins, seafood pools, shower rooms, baseboards, and countertops always have annoying moldy edges, which not only affect the appearance, reduce the grade, but also affect hygiene. This is because these places are made of glass glue and the glass glue itself is suitable for organic matter, glass glue due to the moisture of the water, there will be a lot of mold and other microorganisms on the surface of the glass glue and between the crevices to grow, over time, the mold will be covered with the surface of the glass glue and turn black, at the same time, the mold will absorb more dirt and bacteria, so that the bathtub edge, the corner of the wall looks very dirty and disgusting, not only affect the appearance, but also feel unhygienic. It is also often complained by guests.

The maintenance personnel keep replacing the glass glue edge, and the best way to eliminate your troubles is not to eradicate it! Generally, glass glue will grow mold in a humid environment for about half a year, and a small number of imported anti-mildew glue can last for one to two years, but its price is expensive. Many five-star hotel directors have a headache with this, and their usual solution is to re-glue every six months, which is not only time-consuming, costly, but also cumbersome.

The viscosity of the glass glue is not good, resulting in its poor waterproof performance, and the water will penetrate into the wall through the gap between the glue and the wall, so that the wall will be damp, which will then cause the latex paint or wallpaper in the room to become moldy and black, and peel off. The above are caused by mildew of glass glue, if you are worried about these problems and feel helpless, then Zhicheng waterproof ceramic edge to help you solve this trouble, ceramic edge is a new type of waterproof repair material, is an upgraded product of glass glue, it can permanently solve the bathtub edge, the corner of the wall to become black and mildew. The most prominent feature of the ceramic edge is that it will never age and deteriorate, will never grow mildew and black, and its waterproof performance is very strong, it can be closely bonded with the wall so that the water can not penetrate, the ceramic edge contains chemical components that inhibit the growth of microorganisms, and its surface is smooth and clean like the ceramic surface (the color can also be made into a unified face of the floor.

This is the move to deal with your problems.

Now the coil, asphalt is not very reliable, due to the long-term wind and sun, easy to age, breakage, hollowing, internal water seepage is not far away. As long as the cement itself achieves the waterproof effect, it is the best.

First of all, analyze the problem: 1. It is the leakage of the ground of the balcony 2. The water seepage of the balcony ceiling. If it is water seepage on the ground of your own house, it is water seepage from the rupture of the embedded pipe.

If it is water seepage from the ceiling: the upper ground may not be waterproof, and the water on the ground may cause leakage; Or it is caused by the bursting of the ground embedded water pipe and the leakage of the interface (the water pressure can be judged).

The first priority is to find the problem. The owner's new house is decorated not long before there is water leakage, water seepage, and then every rainy day, the balcony will appear this situation, deal with many times, the problem may still be the same, at this time to smash the balcony open, find out the cause of the leakage, and then deal with it.

Water seepage from the balcony may be the cause of the balcony itself. Basically, when it rains outside, there will be water accumulation on the balcony, and the water seepage place is generally from the corner of the closed balcony, and the seepage is basically caused by the balcony closure is not in place, which must be noted. After this problem occurs, you can find someone to smash the outer edge of the balcony open to find out the ultimate cause.

At this time, the balcony is basically not waterproof, and when the balcony is installed, the decoration destroys the solid wall at the bottom of the balcony, and then this situation occurs, the way to deal with it is to smash the outer edge of the tiles and redo the waterproofing, which can solve this problem.

Marble seepage on the balcony floor: 1. Water seepage into the room. 2. Water seepage downstairs.

After the glass glue treatment, the inadequate construction of the glass glue may cause water to penetrate through the gaps. The service life of glass glue is limited and easy to age, falling off caused by water seepage 1, for marble will absorb water, you can use a waterproof guard 1:3 with water drying situation to spray on the surface of the marble to make the marble fully absorb waterproof materials, seepage into the room to check whether the marble and the corner of the joint is not repaired, you can use black steel joint treasure or gold steel glue to apply to the gap.

2. If it is water seepage at the corner joint, or water seepage at the joint of the drainage pipe, first check whether the glass glue is in good condition, due to the limited life of the glass glue, you can shovel it off and spray it with the roof spray as a whole in the case of drying. In the use of seam treasure A:B=2:

1. Stir evenly and apply it to the joints, if it is water seepage at the joints of the drainage outlet, spray the roofing spray first, and then wipe the gaps with the joints.

2. Carefully check the leakage points before construction, and carefully waterproof all the leakage points; When drilling holes in the wall, pay attention to avoid damage to the waterproof layer.

3. Although the waterproof construction of the balcony does not need to meet the requirements of the bathroom, it is also necessary to find a professional waterproof company to do a good job, especially the top and wall waterproofing. In order to reduce the impact of rainwater on the infill layer between the window and the wall, a waterfront surface can be added above the wall.

Hello, the simple way to deal with the leakage of the window sill in general is:

1. Clean the base surface and moisten it thoroughly.

2. Fill the gaps with caulk if there are obvious cracks.

3. Brush three to four times with acrylic high-elasticity anti-crack waterproof coating along the aluminum alloy frame, and the next time the surface can be painted after each surface drying.

Note: If there is an anti-theft net, the nail that fixes the anti-theft net must be sealed with paint.

In fact, it is better to find a professional to help you deal with it! In the future, choosing a better decoration company before decoration will also reduce this kind of problem!