What are the advantages and disadvantages of three layer hardwood flooring? Price? How to buy?

Pros and cons: First of all, look at the thickness of the surface layer, generally a thickness of more than 4 mm is the best. The second is to look at the material, it is better to choose a harder one, which can increase its impact resistance, so that the floor will not be easily scratched during use.

The third is to see if other cheap wood is used to pretend to be precious wood after dyeing for surface production.

Three-layer laminate floor construction:

Commonly used wood for the panel of three-layer solid wood flooring: ash, oak, teak, birch, beech, maple, catalpa, black walnut, etc. A good panel skin is finely processed from high-quality logs, while a low-quality panel skin is made of inferior products, covered with thicker paint, and has defects such as mildew, moth-eaten, and dead knots.

Price. The price of three-layer parquet is between 400-600 yuan, the relatively expensive one of the icons ranges from 200 to 1500 yuan, and the mid-end one is about 400-600 yuan. However, it is relatively brand safe.

Buying tips. 1. Look at the material and price of the three-layer solid wood floor.

2. Look at the moisture content and accuracy of the three-layer solid wood floor.

3. When choosing a three-layer solid wood floor, pay attention to avoiding product misunderstandings.

4. In the case of the same price, how to choose between three-layer parquet and solid wood flooring?

In the case of the same price, the three-layer solid wood parquet is generally suspended pavement, without hitting the keel, and the space occupied by the whole pavement is smaller than that of the solid wood floor, about half, and the three-layer solid wood floor with the keel of the holy elephant is worth considering; The three-layer parquet is generally larger in size and has no chamfering, which is different from the solid wood floor in terms of decorative effect and daily care; In addition, the three-layer parquet has a reasonable structure, which combines the advantages of laminate flooring and solid wood flooring, and at the same time has stronger stability and thermal resistance.

1. Floor specifications.

In terms of the stability of the plank, the smaller the size of the floor, the better the resistance to deformation, so it is necessary to choose a shorter, narrower solid wood floor, and minimize the bending, twisting, scooping, shrinking, arching and other phenomena of the solid wood floor. Flooring experts believe that the short one is better than the long one; The narrow one is better than the wide, and it is cheap. But now the market is popular wide plate, the wide plate is more beautiful than the narrow plate, generous, the texture is relaxed, the pattern is complete, but the qualified wide plate must go through strict material selection and quality acceptance.

In general, wide floors should have deformation-resistant grooves on the back, and the grooves should be up to one-third of the thickness of the floor. If it is used for floor heating, it should be thin but not thick, generally 8-12mm thick.

2. Floor moisture content.

The moisture content of wooden floors is crucial. The moisture content of the purchased flooring must be equal to the local equilibrium moisture content. When buying a floor, be sure to measure the moisture content, if you don't have a moisture content tester, don't buy its board.

The method of balancing the moisture content determination is very simple, first determine the moisture content of the purchased varieties in the exhibition hall, and then open the box to detect the moisture content of the purchased varieties of wood flooring, if the moisture content of the two is only +1%-2%, it is a qualified product.

3. Floor material.

Observe with your eyes whether the floor is of the same material, and whether the board surface has material defects such as cracking, decay, peeling, dead joints, insect eyes, and blue staining. Usually there is no need to be too strict about color differences, joints, textures, etc., which are the natural properties of wood. It is the color difference and the natural texture that changes that show the natural color of the solid wood floor, which is the fashion pursued by the current international home decoration.

4. Machining accuracy.

Generally, after unpacking the wooden floor, you can take out about 10 pieces of freehand assembly, touch it by hand, see whether its processing quality accuracy, finish, whether it is smooth and smooth, and whether the tenon and groove fit, installation gap, denaturation resistance groove and other assemblies are tightly fitted. Observe the tongue and groove occlusion, assembly gap, and height difference between adjacent plates.

5. Floor after-sales.

There are many wood flooring manufacturers on the market, the quality is uneven, it is recommended to choose a good brand of wood flooring, these brand manufacturers will provide perfect after-sales service, and there is a certain warranty period. It can save a lot of worry.

The advantages and disadvantages of each type of flooring are specific, that is, there are advantages in a certain environment. But moving to another environment isn't necessarily an advantage. The structure of parquet and bamboo flooring is the same.

The specific advantages are generally the same, but the nature of the individual aspects is different. If the temperature changes, the moisture changes, the structure of the parquet is not as stable as the bamboo floor. If the temperature changes sharply, parquet is more stable than bamboo flooring.

That's it.

Three-layer parquet, I only know Jilin Sengong Jinqiao flooring, because he is the first three-layer parquet in China, and the material is selected in Jilin Lushui River.

The decoration foreman explained the choice of three-layer solid wood flooring and how to distinguish the advantages and disadvantages, hoping to help you in decoration.