-
Anonymous users2024-01-23An area of one square meter with Chenguang waterproof coating, the need for waterproof coating, some waterproof coatings may advertise that the area can be brushed, but it may need to be mixed with water, but if the water is too much, the waterproof effect of the paint will be lost.
-
Anonymous users2024-01-22The normal construction thickness of 1 kg of permanent condensate DPS can be sprayed 3-5 square meters, and the specific amount required depends on the actual situation of your bathroom!
-
Anonymous users2024-01-21Kilograms of waterproof mortar can be waterproofed twice per square meter.
-
Anonymous users2024-01-20I have a deep understanding of this, because when helping customers do decoration, we happen to have used both kinds of waterproof coatings. The following is a personal experience that I hope will be helpful to you. We started with ordinary waterproofing coatings, which are traditional two-component waterproofing coatings.
This kind of waterproof coating needs to be scientifically proportioned and stirred to a certain extent before it can be used. Before and after construction, it is necessary to sprinkle water for maintenance, theoretically speaking, 1kg can be painted squared, if the early construction step is not done, the later work will be wasted. The building is solid and easy to coat is recommended by the master, originally I just wanted to try it, to see if it is as the master said that the cover is ready to use, no stirring, no sprinkling before and after construction, maintenance is so magical, the result has become our standard configuration for waterproof construction in the future.
The construction is convenient and simple, and the masters can easily get started, and 1kg can paint 6-7 squares, which greatly saves the cost of time and materials. Personally, I think that as long as the construction is serious and rigorous, any product can be used. Of course, for the sake of the team, I would choose to be solid and easy to coat.
-
Anonymous users2024-01-19Generally, the amount of waterproof coating per square meter is as follows.
Polyurethane coatings: square meters.
Acrylic paint: square meters.
JS waterproof coating: square meters.
Rigid waterproof coating: square meters.
Look at how many times you brush the bathroom, usually twice.
Waterproof coating is better. If the pipe is irregular when using the membrane, it will increase the difficulty of the construction of the tarpaulin, and the tarpaulin will not have adhesive force, and it is easy to produce seepage and leakage in the humid environment of the bathroom. It not only reduces its waterproof effect, but also affects the aesthetics of the entire waterproof layer of the bathroom, if you use waterproof coating, the operation is simple and convenient, and the waterproof is very good.
Two coatings for waterproofing toilets.
Nowadays, the materials used for waterproofing are generally paints, and asphalt-based waterproofing coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom. >>>More
1. Environmental protection If you choose a product that is not environmentally friendly, although the waterproof layer is completed, but in fact, under the thick floor tiles or cement, harmful gases are slowly released, can the air quality in your home be good? Therefore, if you want to buy waterproof materials, you must go to a regular building materials store or supermarket, choose a well-known brand, generally good brand products are equipped with product test reports, product certificates and China Environmental Labeling certification of the Ten Rings or CTC mark. Second, the flexible and rigid cement mortar waterproof coating, although it has a high compressive penetration ability after molding, but the extensibility of this kind of product is not good, a slight earthquake, ground fracture or small cracks, it is easy to cause water leakage, thus losing the waterproof effect. >>>More
In the case of toilets, waterproof paint is generally recommended. >>>More
Generally, the leakage of water in the bathroom is a problem in the details of the building, and we should pay attention to three places, that is, the floor drain, the corner of the wall, and the pipe root. In addition, if the connection between the bathtub drain and the sewer pipe is not tight, it will easily cause gaps and leakage. So we should choose a coating that is most suitable for bathroom decoration, so what waterproof coating is best for the bathroom? >>>More